MC9S08SV8 Просмотр технического описания (PDF) - Freescale Semiconductor

Номер в каталоге

Компоненты Описание

производитель

MC9S08SV8

8-Bit HCS08 Central Processor Unit (CPU)

Freescale Semiconductor 

Freescale Semiconductor

Data Sheet: Technical Data

Document Number: MC9S08SV16

Rev. 2, 7/2009

MC9S08SV16 Series

Covers: MC9S08SV16 and

MC9S08SV8

MC9S08SV16

32-Pin LQFP

873A-03

32-Pin SDIP

1376-02

Features:

• 8-Bit HCS08 Central Processor Unit (CPU)

– Up to 40 MHz CPU at 2.7 V to 5.5 V across temperature

range of –40 °C to 85 °C

– HC08 instruction set with added BGND instruction

– Support for up to 32 interrupt/reset sources

• On-Chip Memory

– Up to 16 KB flash read/program/erase over full

operating voltage and temperature

– Up to 1024-byte random-access memory (RAM)

– Security circuitry to prevent unauthorized access to

RAM and flash contents

• Power-Saving Modes

– Two low power stop modes; reduced power wait mode

– Allows clocks to remain enabled to specific peripherals

in stop3 mode

• Clock Source Options

– Oscillator (XOSC) — Loop-control Pierce oscillator;

crystal or ceramic resonator range of 31.25 kHz to

39.0625 kHz or 1 MHz to 16 MHz

– Internal Clock Source (ICS) — Internal clock source

module containing a frequency-locked-loop (FLL)

controlled by internal or external reference; precision

trimming of internal reference allows 0.2% resolution

and 2% deviation over temperature and voltage;

supporting bus frequencies up to 20 MHz

• System Protection

– Watchdog computer operating properly (COP) reset

with option to run from dedicated 1 kHz internal clock

source or bus clock

– Low-voltage detection with reset or interrupt; selectable

trip points

– Illegal opcode detection with reset

– Illegal address detection with reset

– Flash block protection

• Development Support

– Single-wire background debug interface

– Breakpoint capability to allow single breakpoint setting

during in-circuit debugging (plus two more breakpoints)

– On-chip in-circuit emulator (ICE) debug module

containing two comparators and nine trigger modes

• Peripherals

– IPC — Interrupt priority controller to provide hardware

based nested interrupt mechanism

– ADC — 12-channel, 10-bit resolution; 2.5 μs

conversion time; automatic compare function;

1.7 mV/°C temperature sensor; internal bandgap

reference channel; operation in stop; optional hardware

trigger; fully functional from 2.7 V to 5.5 V

– TPM — One 6-channel and one 2-channel

timer/pulse-width modulators (TPM) modules;

selectable input capture, output compare, or buffered

edge- or center-aligned PWM on each channel

– MTIM16 — One 16-bit modulo timer

– SCI — One serial communications interface module

with optional 13-bit break; LIN extensions

– SPI — One serial peripheral interface module in 8-bit

data length mode with a receiving data buffer hardware

match function

– IIC — Inter-integrated circuit bus module capable of

operation up to 100 kbps with maximum bus loading;

multi-master operation; programmable slave address;

interrupt-driven byte-by-byte data transfer; broadcast

mode; 10-bit addressing

– ACMP — Analog comparator with option to compare to

internal reference

– RTC — Real time counter

– KBI— 8-pin keyboard interrupt module with software

selectable polarity on edge or edge/level modes

• Input/Output

– 30 GPIOs including one output-only pin and one

input-only pin

• Package Options

– 32-pin SDIP

– 32-pin LQFP

This document contains information on a product under development. Freescale reserves the

right to change or discontinue this product without notice.

© Freescale Semiconductor, Inc., 2009. All rights reserved.

Share Link: