MB91110 Просмотр технического описания (PDF) - Fujitsu

Номер в каталоге

Компоненты Описание

производитель

MB91110

32-Bit RISC Microcontroller

Fujitsu 

MB91110 Series

Pin no. Pin name

129 DEOP2/PH2

130

SI/PH3

131

SO/PH4

132

SCK/PH5

133

TI0/PH6

134

TO0/PH7

136

TI1/PI0

137

TO1/PI1

I/O* Circuit type

Function

[DEOP2] This is the DMA transfer end signal output (ch 2) .

This function is effective if the transfer end signal output

specification of DMAC is permitted.

I/O

C

[PH2] This is a multi-purpose input/output port. This function

is effective if the transfer end signal output specification of

DMAC is prohibited.

[SI] This is UART data input. This input is always used while

UART inputs, so outputs from other functions should be

I/O

H

stopped except when carried out intentionally.

[PH3] This is a general-purpose input/output port.

[SO] This is UART data output. This function is effective

when UART data output specification is permitted.

I/O

C

[PH4] This is a general-purpose input/output port. This func-

tion is effective when UART data output specification is pro-

hibited.

[SCK] This is UART clock input/output. Clock output is effec-

tive when UART clock output specification is permitted.

I/O

H

[PH5] This is a general-purpose input/output port. This func-

tion is effective when UART clock output specification is pro-

hibited.

[TI0] This is reload timer 0 input. It is always used when re-

load timer input is permitted, so outputs from other functions

I/O

H

should be stopped except when carried out intentionally.

[PH6] This is a general-purpose input/output port.

[TO0] This is reload timer 0 Output. This function is effective

when reload timer specification is permitted.

I/O

C

[PH7] This is a general-purpose input/output port. This func-

tion is effective when reload timer specification is prohibited.

[TI1] This is reload timer 1 input. It is always used when re-

load timer input is permitted, so outputs from other functions

I/O

H

should be stopped except when carried out intentionally.

[PI0] This is a general-purpose input/output port.

[T01] This is the reload timer 1 output. This function is effec-

tive if the output specification of the reload timer is permitted.

I/O

C

[PI1] This is a multi-purpose input/output port. This function

is effective if the output specification of the reload timer is

prohibited.

(Continued)

10

Share Link: