MAX713CSE(2002) Просмотр технического описания (PDF) - Maxim Integrated
Номер в каталоге
Компоненты Описание
производитель
MAX713CSE Datasheet PDF : 17 Pages
| |||
NiCd/NiMH Battery
Fast-Charge Controllers
ABSOLUTE MAXIMUM RATINGS
V+ to BATT- .................................................................-0.3V, +7V
BATT- to GND ........................................................................±1V
BATT+ to BATT-
Power Not Applied............................................................±20V
With Power Applied ................................The higher of ±20V or
±2V x (programmed cells)
DRV to GND ..............................................................-0.3V, +20V
FASTCHG to BATT- ...................................................-0.3V, +12V
All Other Pins to GND......................................-0.3V, (V+ + 0.3V)
V+ Current.........................................................................100mA
DRV Current. .....................................................................100mA
REF Current.........................................................................10mA
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 10.53mW/°C above +70°C............842mW
Narrow SO (derate 8.70mW/°C above +70°C .............696mW
CERDIP (derate 10.00mW/°C above +70°C ................800mW
Operating Temperature Ranges
MAX71_C_E .......................................................0°C to +70°C
MAX71_E_E .................................................... -40°C to +85°C
MAX71_MJE ................................................. -55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(IV+ = 10mA, TA = TMIN to TMAX, unless otherwise noted. Refer to the Typical Operating Circuit. All measurements are with respect to
BATT-, not GND.)
PARAMETER
V+ Voltage
IV+ (Note 1)
BATT+ Leakage
BATT+ Resistance with Power On
C1 Capacitance
C2 Capacitance
REF Voltage
Undervoltage Lockout
External VLIMIT Input Range
THI, TLO, TEMP Input Range
THI, TLO Offset Voltage (Note 2)
THI, TLO, TEMP, VLIMIT Input Bias Current
CONDITIONS
5mA < IV+ < 20mA
V+ = 0V, BATT+ = 17V
PGM0 = PGM1 = BATT-, BATT+ = 30V
0mA < IREF < 1mA
Per cell
0V < TEMP < 2V, TEMP voltage rising
MIN TYP MAX UNITS
4.5
5.5
V
5
mA
5
µA
30
kΩ
0.5
µF
5
nF
1.96
2.04
V
0.35
0.50
V
1.25
2.50
V
0
2
V
-10
10
mV
-1
1
µA
VLIMIT Accuracy
1.2V < VLIMIT < 2.5V, 5mA < IDRV < 20mA,
PGM0 = PGM1 = V+
-30
30
mV
Internal Cell Voltage Limit
Fast-Charge VSENSE
Trickle-Charge VSENSE
Voltage-Slope Sensitivity (Note 3)
Timer Accuracy
Battery-Voltage to Cell-Voltage
Divider Accuracy
DRV Sink Current
VLIMIT = V+
PGM3 = V+
PGM3 = open
PGM3 = REF
PGM3 = BATT-
MAX713
MAX712
VDRV = 10V
1.6
1.65
1.7
V
225
250
275
mV
1.5
3.9
7.0
4.5
7.8
12.0
mV
12.0 15.6 20.0
26.0 31.3 38.0
-2.5
mV/tA
0
per cell
-15
15
%
-1.5
1.5
%
30
mA
2 _______________________________________________________________________________________
Share Link: 