MAX4008EUT-T Просмотр технического описания (PDF) - Maxim Integrated
Номер в каталоге
Компоненты Описание
производитель
MAX4008EUT-T Datasheet PDF : 10 Pages
| |||
High-Accuracy, 76V, High-Side
Current Monitors in SOT23
PIN
MAX4007
MAX4008
1
1
2
2
3
—
4
4
5
5
6
6
—
3
Pin Description
NAME
CLAMP
GND
OUT
REF
N.C.
BIAS
OUT
FUNCTION
Clamp Voltage Input. External potential used for voltage
clamping of VOUT.
Ground
Current-Monitor Output. OUT sources a current of 1/10th IREF.
Reference Current Output. REF provides the source current to
the cathode of the photodiode.
No Connection. Not internally connected.
Bias Voltage Input. Bias voltage for photodiode.
Current-Monitor Output. OUT presents a voltage proportional to
IREF at 1V/mA. An internal 10kΩ resistor connects OUT to GND
(see Functional Diagram).
BIAS
MAX4007
CURRENT MONITOR
10x
1x
CURRENT
CLAMP
REF
GND
CLAMP
OUT
Functional Diagrams
BIAS
MAX4008
CURRENT MONITOR
10x
CURRENT
CLAMP
REF
1x
CLAMP
OUT
10kΩ
GND
Detailed Description
The MAX4007/MAX4008 are versatile current monitors
intended for monitoring DC photodiode current in fiber
applications (see Functional Diagram). The MAX4007
output is a current that is exactly one-tenth the refer-
ence current. The MAX4008 outputs a voltage that is
proportional to the reference current with a transimped-
ance gain of 1V/mA achieved by a factory-trimmed,
internal 10kΩ resistor.
Both current devices have six decades of dynamic
range and monitor reference current ranging from
250nA to 2.5mA, the nominal operating range, with bet-
ter than 5% accuracy across the entire reference cur-
rent, bias voltage, and temperature ranges. The
corresponding monitor outputs produce 25nA to
0.25mA (MAX4007) and 0.25mV to 2.5V (MAX4008).
When the reference currents are extended to the
broader range of 10nA to 10mA, an accuracy of less
than 10% is maintained. Internal current limiting (20mA,
6 _______________________________________________________________________________________
Share Link: 