MASW-008566 Просмотр технического описания (PDF) - M/A-COM Technology Solutions, Inc.
Номер в каталоге
Компоненты Описание
производитель
MASW-008566 Datasheet PDF : 4 Pages
| |||
MASW-008566
GaAs SP4T 2.5 V High Power Switch
DC - 3.0 GHz
Rev. V1
Electrical Specifications: TA = 25°C, Z0 = 50 Ω 4
Parameter
Test Conditions
Units Min. Typ. Max.
Insertion Loss5
DC – 1 GHz
1 – 2 GHz
2 - 3 GHz
dB
—
0.65
0.85
dB
—
0.80
1.00
dB
—
1.00
—
Isolation
DC – 1 GHz
1 – 2 GHz
2 - 3 GHz
dB
27
29.0
—
dB
21
23.0
—
dB
—
18.5
—
Return Loss
DC – 3 GHz
dB
—
20
—
IP3
IP2
P.1dB
2nd Harmonic
3rd Harmonic
Trise, Tfall
Ton, Toff
Two Tone +26 dBm, 5 MHz Spacing, > 50 MHz
VC = 0 V / 2.5 V
dBm —
Two Tone +26 dBm, 5 MHz Spacing, > 50 MHz
VC = 0 V / 2.5 V
dBm —
VC = 0 V / 2.5 V
dBm —
1 GHz, PIN = +34 dBm, VC = 0 V / 2.5 V
dBc
—
1 GHz, PIN = +34 dBm, VC = 0 V / 2.5 V
dBc
—
10% RF to 90% RF, 90% to 10% RF, VC = 0 V / 2.5 V
µS
—
50% control to 90% RF, 50% control to 10% RF, VC = 0 V /
2.5 V
µS
—
57
—
81
—
38
—
-80
-71
-68
-65
0.2
—
0.2
—
Transients
mV
—
35
—
Control Current
VC = 0 V / 2.5 V, 34 dBm
µA
—
10
50
4. External DC blocking capacitors are required on all RF ports.
5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 - 500 MHz, 39 pF for 0.5 - 3 GHz.
Absolute Maximum Ratings 6,7
Parameter
Absolute Maximum
Input Power
(0.5 - 3.0 GHz, 2.5 V Control)
+38 dBm
Voltage
Operating Temperature
± 8.5 volts
-40°C to +85°C
Storage Temperature
-65°C to +150°C
6. Exceeding any one or combination of these limits may cause
permanent damage to this device.
7. M/A-COM does not recommend sustained operation near
these survivability limits.
Truth Table 8,9
V1 V2 V3 V4
1 000
0 100
0 010
0 001
ANT- ANT- ANT- ANT-
RF1 RF2 RF3 RF4
On Off Off Off
Off On Off Off
Off Off On Off
Off Off Off On
8. Differential voltage, V (state 1) -V (state 2), must be 2.5 V
minimum.
9. 0 = -5 V to +2.5 V, 1 = -2.5 V to +5 V
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Share Link: 