LPC2141FBD64(2007) Просмотр технического описания (PDF) - NXP Semiconductors.
Номер в каталоге
Компоненты Описание
производитель
LPC2141FBD64
(Rev.:2007)
(Rev.:2007)
NXP Semiconductors.
LPC2141FBD64 Datasheet PDF : 39 Pages
| |||
NXP Semiconductors
LPC2141/42/44/46/48
Single-chip 16-bit/32-bit microcontrollers
I Low power Real-Time Clock (RTC) with independent power and 32 kHz clock input
I Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 kbit/s),
SPI and SSP with buffering and variable data length capabilities
I Vectored Interrupt Controller (VIC) with configurable priorities and vector addresses
I Up to 45 of 5 V tolerant fast general purpose I/O pins in a tiny LQFP64 package
I Up to 21 external interrupt pins available
I 60 MHz maximum CPU clock available from programmable on-chip PLL with settling
time of 100 µs
I On-chip integrated oscillator operates with an external crystal from 1 MHz to 25 MHz
I Power saving modes include Idle and Power-down
I Individual enable/disable of peripheral functions as well as peripheral clock scaling for
additional power optimization
I Processor wake-up from Power-down mode via external interrupt or BOD
I Single power supply chip with POR and BOD circuits:
N CPU operating voltage range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O
pads
3. Ordering information
Table 1. Ordering information
Type number Package
Name
Description
LPC2141FBD64 LQFP64
LPC2142FBD64
plastic low profile quad flat package; 64 leads;
body 10 × 10 × 1.4 mm
LPC2144FBD64
LPC2146FBD64
LPC2148FBD64
Version
SOT314-2
3.1 Ordering options
Table 2. Ordering options
Type number
Flash RAM
memory
Endpoint ADC (channels DAC
USB RAM overall)
LPC2141FBD64 32 kB 8 kB
2 kB
1 (6 channels) -
LPC2142FBD64 64 kB 16 kB
2 kB
1 (6 channels) 1
LPC2144FBD64 128 kB 16 kB
2 kB
2 (14 channels) 1
LPC2146FBD64 256 kB
32 kB + 8 kB 2 kB
shared with
USB DMA[1]
2 (14 channels) 1
LPC2148FBD64 512 kB
32 kB + 8 kB 2 kB
shared with
USB DMA[1]
2 (14 channels) 1
Temperature
range (°C)
−40 to +85
−40 to +85
−40 to +85
−40 to +85
−40 to +85
[1] While the USB DMA is the primary user of the additional 8 kB RAM, this RAM is also accessible at any time
by the CPU as a general purpose RAM for data and code storage.
LPC2141_42_44_46_48_3
Product data sheet
Rev. 03 — 19 October 2007
© NXP B.V. 2007. All rights reserved.
2 of 39
Share Link: