LC78625E
• Phase control gain switching
Code
$B1
$B2
$B3
$B0
COMMAND
CLV phase comparator divisor: 1/2
CLV phase comparator divisor: 1/4
CLV phase comparator divisor: 1/8
No CLV phase comparator divisor used
RES = L
q
The phase control gain can be changed by changing the divisor used by the dividers in the stage immediately preceding
the phase comparator.
• CLV three-value output
Code
COMMAND
RES = L
$B4
CLV three-value output
$B5
CLV two-value output (the scheme used by previous products)
q
The CLV three-value output command allows the CLV to be controlled by a single pin. However, the spindle gain is 6
dB lower when this pin is used, so applications must increase the gain in the servo system.
No. 5502-15/35