KYL-210 Просмотр технического описания (PDF) - SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD.
Номер в каталоге
Компоненты Описание
производитель
KYL-210 Datasheet PDF : 9 Pages
| |||
Shenzhen KYL Communication Equipment Co., Ltd
bit received by RxD.
As data processing will be made on user’s data by KYL-210 transceiver using
FEC (Forward Error Correction) or other correction algorithm, when RxD of a
KYL-200L transceiver ‘A’ receives the data, then transmits it, the other one
transceiver ‘B’ will have a delay (ts) to receive and transmit by TxD. Different
RF data rate causes different delay time. Please see the specific delay time
below:
RF Date Rate
(bps)
1200
2400
4800
Delay
Ts(mS)
90
48
30
RF Date Rate
(bps)
9600
19200
Delay
Ts(mS)
16
10
Timing diagram:
c. Error dealing procedure:
To enhance the reliability and stability of user’s systems, a verify bit or a Cyclic
Redundancy Check (CRC) mode is highly recommended to prevent wrong
information while using KYL-210 modules.
d. Large-number data transmission
In theory, when the interface data rate is faster than the RF data rate, KYL-210
transceivers can sent unlimited-long data package, but long packages more than
120B are not recommended. The length of each package should be between
60~100B. We also recommend our users to use Automatic Error Request
Equipment (ARQ) to prevent wrong information.
Reasons:
What if the actual transmission BER (Bit Error Rate) is 10-4, 1 packet with 1KB
data which is about 10-thousand bits, is sent, theoretically, at least 1 bit will be
received wrongly, then the 1KB information will never be received correctly.
But if we package the data into 10 packets with 100B for each, when all 10
Fax: +86-755-83408785
sales02@rf-data.com
www.rf-data.com
Share Link: 