KS0075 Просмотр технического описания (PDF) - Samsung
Номер в каталоге
Компоненты Описание
производитель
KS0075 Datasheet PDF : 71 Pages
| |||
KS0075
34COM/100SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
PAD DESCRIPTION (continued)
PAD (NO)
IM (55)
RS/CS (58)
RW/SID (59)
E/SCLK (60)
DB0/SOD (61)
DB1DB3
(6264)
DB4DB7
(6568)
INPUT/
OUTPUT
Input
Input
Input
Input
Input
Output/Output
Input.
Output
NAME
DESCRIPTION
Interface mode Select Interface mode with the MPU.
selection
When IM = "Low" : Serial mode,
When IM = "High" : 4-bit/8-bit bus mode.
Register select/
Chip select
In bus mode, used as register selection input.
When RS/CS = "High", Data register is selected.
When RS/CS = "Low", Instruction register is
selected.
In serial mode, used as chip selection input.
When RS/CS = "Low", selected. When RS/CS =
"High", not selected.(Low access enable)
Read
In bus mode, used as read/write selection input.
write/Serial input When RW/SID = "High", read operation. When
data
RW/SID = "Low", write operation.
In serial mode, used for data input pin.
Read write
enable/Serial
clock
In bus mode, used as read write enable signal.
In serial mode, used as serial clock input pin.
Data bus 0
bit/Serial output
data
In 8-bit bus mode, used as lowest bi-directional
data bit. During 4-bit bus mode, Open this pin.
In serial mode, used as serial data output pin. If
not in read operation, open this pin.
Data bus 1 ~ 7 In 8-bit bus mode, used as low order bi-
directional data bus.
During 4-bit bus mode or serial mode, open
these pins.
In 8-bit bus mode, used as high order bi-
directional data bus. In case of 4-bit bus mode,
used as both high and low order.
DB7 used for Busy Flag output.
During serial mode, open these pins.
INTERFACE
-
MPU
MPU
MPU
MPU
MPU
MPU
Share Link: 