LC374100ST Просмотр технического описания (PDF) - SANYO -> Panasonic
Номер в каталоге
Компоненты Описание
производитель
LC374100ST Datasheet PDF : 4 Pages
| |||
AC Test Conditions
Input pulse levels
Input rise/fall time
Input timing level
Output timing level
Output load
0.4 to 2.8 V
5 ns
1.5 V
1.5 V
See Figure 1
Timing Chart
LC374100SM, ST
Figure 1 Output Load
System Design Notes
These ICs adopt the ATD technique, in which operation starts when a change in either the CE or address inputs is
detected. This means that the output data immediately after power is applied is invalid. When using these ICs as program
memory for Z80 and similar microprocessors, applications must take into account the fact that valid data will not be
output after power is first applied unless the value of either the CE or at least one of the address lines is changed after the
power supply has stabilized.
Another point due to the use of the ATD technique is that these ICs are sensitive to input noise. Do not apply voltages
outside the allowable DC input levels for extended periods and do not apply input voltages with large noise components.
s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace
equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of
which may directly or indirectly cause injury, death or property loss.
s Anyone purchasing any products described or contained herein for an above-mentioned use shall:
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and
distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all
damages, cost and expenses associated with such use:
Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on
SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees
jointly or severally.
s Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for
volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied
regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of May, 1998. Specifications and information herein are subject to change
without notice.
PS No. 5609-4/4
Share Link: 