IR11-21C-TR8 Просмотр технического описания (PDF) - EVERLIGHT
Номер в каталоге
Компоненты Описание
производитель
IR11-21C-TR8 Datasheet PDF : 9 Pages
| |||
Data Sheet
1206 Package Chip Infrared LED With Inner Lens
IR11-21C/TR8
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
7
Copyright © 2013, Everlight All Rights Reserved. Release Date : 5/28/2013. Issue No:DIR-0000945. Rev3
www.everlight.com
Revision : 3
LifecyclePhase:
Release Date:2013-06-04 11:57:59.0
Expired Period: Forever
Share Link: 