IN74HC4052A Просмотр технического описания (PDF) - IK Semicon Co., Ltd
Номер в каталоге
Компоненты Описание
производитель
IN74HC4052A Datasheet PDF : 8 Pages
| |||
IN74HC4052A
MAXIMUM RATINGS*
Symbol
Parameter
Value
Unit
VCC Positive DC Supply Voltage (Referenced to GND)
-0.5 to +7.0
V
(Referenced to VEE)
-0.5 to +14.0
VEE Negative DC Supply Voltage (Referenced to GND)
-7.0 to +0.5
V
VIS Analog Input Voltage
VEE - 0.5 to VCC+0.5
V
VIN Digital Input Voltage (Referenced to GND)
-1.5 to VCC +1.5
V
I
DC Input Current Into or Out of Any Pin
±25
mA
PD Power Dissipation in Still Air, Plastic DIP+
SO Package+
750
mW
500
Tstg Storage Temperature
-65 to +150
°C
TL
Lead Temperature, 1 mm from Case for 10 Seconds
260
°C
(Plastic DIP or SO Package)
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
+Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C
SO Package: - 7 mW/°C from 65° to 125°C
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min Max Unit
VCC
Positive Supply Voltage (Referenced to GND)
(Referenced to VEE)
2.0 6.0
V
2.0 12.0
VEE
Negative DC Supply Voltage (Referenced to GND)
- 6.0 GND V
VIS
Analog Input Voltage
VEE
VCC
V
VIN
Digital Input Voltage (Referenced to GND)
VIO*
Static or Dynamic Voltage Across Switch
GND VCC
V
-
1.2
V
TA
Operating Temperature, All Package Types
-55 +125 °C
tr, tf
Input Rise and Fall Time (Channel Select VCC =2.0 V
0 1000 ns
or Enable Inputs) (Figure 5)
VCC =4.5 V
0
500
VCC =6.0 V
0
400
* For voltage drops across the switch greater than 1.2 V (switch on), excessive VCC current may be drawn;
i. e., the current out of the switch may contain both VCC and switch input components. The reliability of the device
will be unaffected unless the Maximum Ratings are exceeded.
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range indicated in the
Recommended Operating Conditions..
Unused digital input pins must be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
Analog I/O pins may be left open or terminated.
Rev. 00
Share Link: 