IDT72V36102 Просмотр технического описания (PDF) - Integrated Device Technology
Номер в каталоге
Компоненты Описание
производитель
IDT72V36102 Datasheet PDF : 29 Pages
| |||
IDT72V3682/72V3692/72V36102 3.3V CMOS SyncBiFIFOTM
16,384 x 36 x 2, 32,768 x 36 x 2 and 65,536 x 36 x 2
COMMERCIAL TEMPERATURE RANGE
ABSOLUTE MAXIMUM RATINGS OVER OPERATING FREE-AIR
TEMPERATURE RANGE (Unless otherwise noted)(1)
Symbol
Rating
Commercial
Unit
VCC
Supply Voltage Range
–0.5 to +4.6
V
VI(2)
Input Voltage Range
VO(2)
Output Voltage Range
–0.5 to VCC+0.5
V
–0.5 to VCC+0.5
V
IIK
Input Clamp Current (VI < 0 or VI > VCC)
±20
mA
IOK
Output Clamp Current (VO = < 0 or VO > VCC)
±50
mA
IOUT
Continuous Output Current (VO = 0 to VCC)
±50
mA
ICC
Continuous Current Through VCC or GND
±400
mA
TSTG
Storage Temperature Range
–65 to 150
°C
NOTES:
1. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these
or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute maximum rated conditions for extended periods may affect
device reliability.
2. The input and output voltage ratings may be exceeded provided the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min. Typ. Max. Unit
VCC Supply Voltage
3.15 3.3 3.45
V
VIH High-Level Input Voltage
2
— VCC+0.5 V
VIL Low-Level Input Voltage
—
—
0.8
V
IOH High-Level Output Current
—
—
–4
mA
IOL Low-Level Output Current
—
—
8
mA
TA
Operating Temperature
0
—
70
°C
NOTE:
1. Vcc = 3.3V ± 0.15V, JEDEC JESD8-A compliant
ELECTRICAL CHARACTERISTICS OVER RECOMMENDED OPERATING
FREE-AIR TEMPERATURE RANGE (Unless otherwise noted)
Symbol
Parameter
Test Conditions
IDT72V3682
IDT72V3692
IDT72V36102
Commercial
tCLK = 10, 15 ns(2)
Min. Typ. Max. Unit
VOH
Output Logic "1" Voltage
VCC = 3.0V,
IOH = –4 mA
2.4
—
—
V
VOL
Output Logic "0" Voltage
VCC = 3.0V,
IOL = 8 mA
—
—
0.5
V
ILI
Input Leakage Current (Any Input)
VCC = 3.6V,
VI = VCC or 0
—
—
±5
µA
ILO
Output Leakage Current
VCC = 3.6V,
VO = VCC or 0
—
—
±5
µA
ICC2(3) Standby Current (with CLKA and CLKB running) VCC = 3.6V,
VI = VCC - 0.2V or 0
—
—
5
mA
ICC3(3) Standby Current (no clocks running)
VCC = 3.6V,
VI = VCC - 0.2V or 0
—
—
5
mA
CIN(4)
Input Capacitance
VI = 0,
f = 1 MHz
—
4
—
pF
COUT(4) OutputCapacitance
VO = 0,
f = 1 MHZ
—
8
—
pF
NOTES:
1. All typical values are at VCC = 3.3V, TA = 25°C.
2. Vcc = 3.3V ± 0.15V, TA = 0° to +70°; JEDEC JESD8-A compliant
3. For additional ICC information, see Figure 1, Typical Characteristics: Supply Current (ICC) vs. Clock Frequency (fS).
4. Characterized values, not currently tested.
6
Share Link: 