IC41C16100AS-60T Просмотр технического описания (PDF) - Integrated Circuit Solution Inc
Номер в каталоге
Компоненты Описание
производитель
IC41C16100AS-60T Datasheet PDF : 21 Pages
| |||
IC41C16100A/IC41C16100AS
IC41LV16100A/IC41LV16100AS
ELECTRICAL CHARACTERISTICS(1)
(Recommended Operating Conditions unless otherwise noted.)
Symbol Parameter
Test Condition
Speed Min. Max. Unit
IIL
Input Leakage Current
Any input 0V ≤ VIN ≤ Vcc
Other inputs not under test = 0V
–5
5
µA
IIO
Output Leakage Current
Output is disabled (Hi-Z)
0V ≤ VOUT ≤ Vcc
–5
5
µA
VOH
Output High Voltage Level
IOH = –5.0 mA (5V)
IOH = –2.0 mA (3.3V)
2.4 —
V
VOL
Output Low Voltage Level
IOL = 4.2 mA (5V)
IOL = 2.0 mA (3.3V)
— 0.4
V
ICC1
Standby Current: TTL
RAS, LCAS, UCAS ≥ VIH Commerical 5V
—
3.3V —
2 mA
2
ICC2
Standby Current: CMOS
RAS, LCAS, UCAS ≥ VCC – 0.2V
5V —
3.3V —
1 mA
0.5
ICC3
Operating Current:
RAS, LCAS, UCAS,
Random Read/Write(2,3,4)
Address Cycling, tRC = tRC (min.)
Average Power Supply Current
-50 — 160 mA
-60 — 145
ICC4
Operating Current:
RAS = VIL, LCAS, UCAS,
EDO Page Mode(2,3,4)
Cycling tPC = tPC (min.)
Average Power Supply Current
-50 — 90 mA
-60 — 80
ICC5
Refresh Current:
RAS-Only(2,3)
RAS Cycling, LCAS, UCAS ≥ VIH
tRC = tRC (min.)
Average Power Supply Current
-50 — 160 mA
-60 — 145
ICC6
Refresh Current:
RAS, LCAS, UCAS Cycling
CBR(2,3,5)
tRC = tRC (min.)
Average Power Supply Current
-50 — 160 mA
-60 — 145
ICCS
Self Refresh Current
Self Refresh mode
5V — 500 µA
3.3V — 300 µA
Notes:
1. An initial pause of 200 µs is required after power-up followed by eight RAS refresh cycles (RAS-Only or CBR) before proper device
operation is assured. The eight RAS cycles wake-up should be repeated any time the tREF refresh requirement is exceeded.
2. Dependent on cycle rates.
3. Specified values are obtained with minimum cycle time and the output open.
4. Column-address is changed once each EDO page cycle.
5. Enables on-chip refresh and address counters.
Integrated Circuit Solution Inc.
7
DR030-0A 09/28/2001
Share Link: 