HR30(2004) Просмотр технического описания (PDF) - HIROSE ELECTRIC

Номер в каталоге

Компоненты Описание

производитель

HR30
(Rev.:2004)

Miniature Waterproof Plastic Connectors

HIROSE ELECTRIC 

Cable

Push/pull

locking collar

A

Plug insulator body

Cable

Back shell

Guide keys

View A (2:1)

Cable

Tightening collar for back shell

Solder termination fixture

3

Groove - sealing bushing

Front edge of cable jacket

Figure B

Figure C

Connector

3 and 6 Pos.

10 and 12 Pos.

Back shell tightening collar size

16 mm

18 mm

Torque

0.5N.m

0.5N.m

1. To prevent accidental loosening of the back shell it is recommended that a small amount of primer (Loctite® 7649) and

adhesive (Loctite® 271) be applied to the threads of the insulator body before proceeding.

2. Keeping the terminated insulator body on the fixture, re-assembly the plug in order shown.

4. Using the correct back-tightening collar tighten the back shell to the specified torque.

When tightening the collar make sure that the cable will NOT turn.

5. Remove the assembly from the fixture.

Note: Loctite is a registered trademark of the Henkel Loctite Corporation.

11

Share Link: