HLMP-810X Просмотр технического описания (PDF) - HP => Agilent Technologies
Номер в каталоге
Компоненты Описание
производитель
HLMP-810X Datasheet PDF : 5 Pages
| |||
Axial Luminous Intensity and Viewing Angle at TA = 25°C
Part Number
HLMP-
Minimum Intensity
(mcd) @ 20 mA
Typical Intensity
(mcd) @ 20 mA
Typical Radiant
Intensity
(mW/sr) @ 20 mA
8103
2000
3000
35.3
8102
1400
2000
23.5
8100
290
1000
11.8
C100
290
750
8.8
C110
200
400
4.7
Note:
1. θ1/2 is the off axis angle from optical centerline where the luminous intensity is 1/2 the on-axis value.
2θ1/2 [1]
Degrees
7
7
19
30
40
Absolute Maximum Ratings at TA = 25°C
Peak Forward Current[2] .......................................................... 300 mA
Average Forward Current (@ IPEAK = 300 mA) [1,2] ................... 30 mA
DC Forward Current[3] ............................................................... 50 mA
Power Dissipation .................................................................... 100 mW
Reverse Voltage (IR=100 µA) ........................................................... 5 V
Transient Forward Current (10 µs Pulse)[4] ............................ 500 mA
Operating Temperature Range ...................................... -55 to +100°C
Storage Temperature Range .......................................... -55 to +100°C
LED Junction Temperature ....................................................... 110°C
Lead Soldering Temperature
[1.6 mm (0.063 in.) from body] .......................... 260°C for 5 seconds
Notes:
1. Maximum IAVG at f = 1 kHz, DF = 10%.
2. Refer to Figure 6 to establish pulsed operating conditions.
3. Derate linearly as shown in Figure 5.
4. The transient peak current is the maximum non-recurring peak current the device
can withstand without damaging the LED die and wire bonds. It is not
recommended that the device be operated at peak currents above the Absolute
Maximum Peak Forward Current.
1-45
Share Link: 