HCPL-7560 Просмотр технического описания (PDF) - Avago Technologies

Номер в каталоге

Компоненты Описание

производитель

HCPL-7560

Optically Isolated Sigma-Delta (Σ-∆) Modulator

Avago Technologies 

Regulatory Information

The HCPL-7560 has been approved by the following organizations:

IEC/EN/DIN EN 60747-5-2

Approved under:

IEC 60747-5-2:1997 + A1:2002

EN 60747-5-2:2001 + A1:2002

DIN EN 60747-5-2 (VDE 0884 Teil 2):2003-01.

UL

Approval under UL 1577, component recognition program up to VISO = 3750 VRMS. File E55361.

CSA

Approval under CSA Component Acceptance Notice #5, File CA 88324.

IEC/EN/DIN EN 60747-5-2 Insulation Characteristics[1]

Description

Symbol HCPL-7560 Unit

Installation classification per DIN VDE 0110/1.89, Table 1

for rated mains voltage ≤ 300 Vrms

I - IV

for rated mains voltage ≤ 450 Vrms

I - III

for rated mains voltage ≤ 600 Vrms

I - II

Climatic Classification

40/85/21

Pollution Degree (DIN VDE 0110/1.89)

2

Maximum Working Insulation Voltage

Input to Output Test Voltage, Method b[2]

VIORM x 1.875=VPR, 100% Production Test with tm=1 sec,

Partial discharge < 5 pC

Input to Output Test Voltage, Method a[2]

VIORM x 1.5=VPR, Type and Sample Test, tm=60 sec,

Partial discharge < 5 pC

VIORM

VPR

891

1670

VPR

1336

Vpeak

Vpeak

Vpeak

Highest Allowable Overvoltage

(Transient Overvoltage tini = 10 sec)

VIOTM

6000

Vpeak

Safety-limiting values - maximum values allowed in the event of a failure,

also see Figure 13.

Case Temperature

Input Current[3]

Output Power[3]

TS

175

°C

IS, INPUT

400

mA

PS, OUTPUT 600

mW

Insulation Resistance at TS, VIO = 500 V

RS

>109

W

Notes:

1. Insulation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits within the

application. Surface Mount Classifications is Class A in accordance with CECC00802.

2. Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/

EN/DIN EN 60747-5-2) for a detailed description of Method a and Method b partial discharge test profiles.

3. Refer to the following figure for dependence of PS and IS on ambient temperature.



Share Link: