HCPL-0708-XXX Просмотр технического описания (PDF) - HP => Agilent Technologies

Номер в каталоге

Компоненты Описание

производитель

HCPL-0708-XXX

High Speed CMOS Optocoupler

HP => Agilent Technologies 

Package Characteristics

All Typicals at TA = 25°C.

Parameter

Input-Output Insulation

Input-Output Momentary

Withstand Voltage

Input-Output Resistance

Input-Output Capacitance

Symbol

II-O

Min. Typ. Max. Units

1

µA

VISO

2500

RI-O

1012

CI-O

0.6

Vrms

Ω

pF

Test Conditions

45% RH, t = 5 s

VI-O = 3 kV dc,

TA = 25°C

RH ≤ 50%, t = 1 min.,

TA = 25°C

VI-O = 500 V dc

f = 1 MHz, TA = 25°C

Notes:

1. tPHL propagation delay is measured from the 50% level on the risiing edge of the input pulse to the 2.5 V level of the falling edge

of the VO signal. tPLH propagation delay is measured from the 50% level on the falling edge of the input pulse to the 2.5 V level of

the rising edge of the VO signal.

2. PWD is defined as |tPHL - tPLH|.

3. tPSK is equal to the magnitude of the worst case difference in tPHL and/or tPLH that will be seen between units at any given

temperature within the recommended operating conditions.

4. CMH is the maximum tolerable rate of rise of the common mode voltage to assure that the output will remain in a high logic state.

5. CML is the maximum tolerable rate of fall of the common mode voltage to assure that the output will remain in a low logic state.

6

Share Link: