HAL525SF-K Просмотр технического описания (PDF) - Micronas

Номер в каталоге

Компоненты Описание

производитель

HAL525SF-K

Hall-Effect Switches

Micronas 

DATA SHEET

1.5. Hall Sensor Package Codes

HALXXXPA-T

Temperature Range: K or E

Package: SF for SOT89B-1

UA for TO92UA

Type: 526

Example: HAL526UA-E

→ Type: 526

→ Package: TO92UA

→ Temperature Range: TJ = −40 °C to +100 °C

Hall sensors are available in a wide variety of packag-

ing versions and quantities. For more detailed informa-

tion, please refer to the brochure: “Hall Sensors:

Ordering Codes, Packaging, Handling”.

1.6. Solderability and Welding

During soldering reflow processing and manual

reworking, a component body temperature of 260 C

should not be exceeded.

Welding

Device terminals should be compatible with laser and

resistance welding. Please note that the success of

the welding process is subject to different welding

parameters which will vary according to the welding

technique used. A very close control of the welding

parameters is absolutely necessary in order to reach

satisfying results. Micronas, therefore, does not give

any implied or express warranty as to the ability to

weld the component.

1.7. Pin Connections

1 VDD

3

OUT

2 GND

Fig. 1–1: Pin configuration

HAL 525, HAL 526

Micronas

Nov. 30, 2009; DSH000144_003EN

5

Share Link: