GEN600 Просмотр технического описания (PDF) - DENSEI-LAMBDA

Номер в каталоге

Компоненты Описание

производитель

GEN600

Programmable DC Power Supplies 750W/1500W

DENSEI-LAMBDA 

General Specifications Genesys™ 750W/1500W

2.1 INPUT CHARACTERISTICS

1. Input voltage/freq. (*1)

2. Power Factor

3. EN61000-3-2,3 compliance

4. Input current 100/200Vac

5. Inrush current 100/200Vac

6. Hold-up time

85~265Vac continuous, 47~63Hz, single phase

0.99 @100/200Vac, rated output power.

Complies with EN61000-3-2 class A and EN61000-3-3 at 20~100% output power.

750W :10.5A / 5A,

1500W :21A / 11A

750W :Less than 25A,

1500W :Less than 50A

More than 20mS , 100Vac , at 100% load.

2.2 POWER SUPPLY CONFIGURATION

1. Parallel Operation

2. Series Operation

Up to 4 units in master/slave mode with single wire current balance connection

Up to 2 units. with external diodes. 600V Max to Chassis ground

2.3 ENVIRONMENTAL CONDITIONS

1. Operating temp

2. Storage temp

3. Operating humidity

4. Storage humidity

5. Vibration

6. Shock

7. Altitude

0~50 °C, 100% load.

-20~70°C

30~90% RH (no condensation).

10~95% RH (no condensation).

MIL-810E, method 514.4 , test cond. I-3.3.1 . The EUT is fixed to the vibrating surface.

Less than 20G , half sine , 11mSec. Unit is unpacked.

Operating: 10000ft (3000m) , Non operating: 40000ft (12000m).

2.4 EMC

1.Applicable standards:

2.ESD

3.Fast transients

4.Surge immunity

5.Conducted immunity

6.Radiated immunity

7.Conducted emission

8.Radiated emission

9.Voltage dips

10. Conducted emission

11. Radiated emission

EN55024

IEC1000-4-2. Air-disch.-8KV, contact disch.-4KV

IEC1000-4-4. 2KV

IEC1000-4-5. 1KV line to line, 2KV line to ground

IEC1000-4-6, 3V

IEC1000-4-3, 3V/m

EN55022B,FCC part 15J-B,VCCI-2

EN55022A,FCC part 15-A,VCCI-1

EN61000-4-11

EN55022B, FCC part 15-B, VCCI-2.

EN55022A, FCC part 15-A, VCCI-1.

2.5 SAFETY

1.Applicable standards:

2.Withstand voltage

3.Insulation resistance

CE Mark, UL60950,EN60950 listed. Vout<60V:Output is SELV , IEEE/Isolated analog are SELV.

60<Vout<400V: Output is hazardous, IEEE/Isolated analog are SELV.

400<Vout<600V:Output is hazardous, IEEE/Isolated analog are not SELV.

Vout<60V models :Input-Outputs (SELV): 3.0KVrms 1min, Input-Ground: 2.0KVrms 1min.

60<Vout<600V models: Input-Haz. Output: 2.5KVrms 1min, Input-SELV: 3KVrms 1min.

Hazardous Output.-SELV: 1.9KVrms 1min, Hazardous Output-Ground:1.9KVrms 1min.

Input-Ground: 2KVrms 1min.

More than 100Mohm at 25°C , 70% RH.

2.6 MECHANICAL CONSTRUCTION

1. Cooling

2. Dimensions (WxHxD)

3. Weight

4. AC Input connector

5.Output connectors

Forced air flow: from front to rear. No ventilation holes at the top or bottom of the chassis Variable fan speed.

W: 422.8mm, H: 43.6mm, D: 432.8mm (excluding connectors, encoders, handles etc..)

750W: 7Kg (15.4 Lbs)

1500W: 8.5Kg (18.7 Lbs)

750W: AC Inlet IEC320.

1500W: screw terminal block, Phoenix P/N: FRONT-4-H-7.62 , with strain relief

6V to 60V models: bus-bars (hole Ø 8.5mm). 80V to 600V models :terminal block ,Phoenix P/N: FRONT-4-H-7.62

2.7 RELIABILITY SPECS

1. Warranty

5 years.

*1: For cases where conformance to various safety standards (UL, IEC etc.) is required, to be described as 100-240Vac (50/60Hz).

Outline Drawing Genesys™ 750W/1500W Units

NOTE

1. PLUG CONNECTORS INCLUDED WITH THE POWER SUPPLY

2. CHASSIS SLIDES MOUNTING HOLES #10-32 MARKED "A"

GENERAL DEVICES P/N: CC301-00-S160 OR EQUIVALENT

|4

Share Link: