EM91240A Просмотр технического описания (PDF) - ELAN Microelectronics

Номер в каталоге

Компоненты Описание

производитель

EM91240A

TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE

ELAN Microelectronics 

EM91240 SERIES

TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE

pager, Memory and other system applications.

Storing : EM91240 series support two operating methods to store numbers into SAVE redial memory.

Method 1

• To select Pulse or Tone mode.

• Off-hook (or turn on HF function), push d1, d2, .. , dn. The numbers d1, d2, .. , dn will be dialed out in Pulse

or Tone mode as selection.

• After dn had been dialed out and push [ST], Save key. If the keying numbers are more than 32 digits that

content of SAVE memory can not be updated. Otherwise, these numbers will be stored into SAVE memory.

In the [] key allows to be omitted.

Method 2

Off-hook (or turn on HF function), push ST, d1, d2, .. , dn, [ST], Save. If the keying numbers are not over 32

digits, the numbers d1, d2, .. , dn will be stored in SAVE redial memory automatically.

Dialing :

• To select Pulse or Tone mode.

• Off-hook (or turn on HF function), push Save key. The numbers stored in SAVE memory will be dialed out

in Pulse or Tone mode as selection.

Repertory memory

The EM91240 series incorporated several sets repertory memory and each one can store number up to 16 digits.

In memory storing, if stored numbers are more than 16 digits that only the previous 16 digits can be stored into

specific memory. Otherwise, these numbers can be stored entirely. After memory dialed out, the content of

LNB is keeping to current data.

Storing of 40 sets memory

Indirect (three-touch) operation

Off-hook (or turn on HF function), push ST, d1, d2, .. , dn, ST, n, n. The numbers d1, d2, .. , dn will be stored

into memory location “n n”. The “n n” expressed digital number from 01 to 40.

Dialing (after memory dialed out, the content of LNB is keeping to current data)

Indirect (three-touch) memory

• To select Pulse or Tone mode.

• Off-hook (or Turn on HF function), push A, n , n key. The numbers that are stored in indirect memory

location “n n” will be dialed out in Pulse or Tone mode as selection . The “n n” expressed digital number

from 01 to 40.

* This specification are subject to be changed without notice.

10.1.1997 5

Share Link: