E48SR12007PMFH Просмотр технического описания (PDF) - Delta Electronics, Inc.

Номер в каталоге

Компоненты Описание

производитель

E48SR12007PMFH

Delphi Series E48SR12007, 84W Eighth Brick DC/DC Power Modules: 48V in, 12V/7A out

Delta Electronics, Inc. 

ELECTRICAL CHARACTERISTICS CURVES

0

0

0

0

Figure 8: Output voltage response to step-change in load

current (75%-50%-75% of Io, max; di/dt = 0.1A/µs). Load cap:

10µF tantalum capacitor and 1µF ceramic capacitor. Top Trace:

Vout (0.2V/div, 200us/div), Bottom Trace: Iout (1A/div). Scope

measurement should be made using a BNC cable (length

shorter than 20 inches). Position the load between 51 mm to 76

mm (2 inches to 3 inches) from the module

Figure 9: Output voltage response to step-change in load

current (75%-50%-75% of Io, max; di/dt = 2.5A/µs). Load cap:

47µF, 35mΩ ESR solid electrolytic capacitor and 1µF ceramic

capacitor. Top Trace: Vout (0.2V/div, 200us/div), Bottom Trace:

Iout (1A/div). Scope measurement should be made using a

BNC cable (length shorter than 20 inches). Position the load

between 51 mm to 76 mm (2 inches to 3 inches) from the

module

0

Figure 10: Test set-up diagram showing measurement points

for Input Terminal Ripple Current and Input Reflected Ripple

Current.

Note: Measured input reflected-ripple current with a simulated

source Inductance (LTEST) of 12 µH. Capacitor Cs offset

possible battery impedance. Measured current as shown below

Figure 11: Input Terminal Ripple Current, ic, at full rated output

current and nominal input voltage with 12µH source impedance

and 33µF electrolytic capacitor (500 mA/div, 2us/div)

E48SR12007_03022007

5

Share Link: