ABRIDGED DATA SHEET
DS2465
SHA-256 Coprocessor with 1-Wire Master Function
Table 7. Parameter Byte Bitmap
BIT 7
S/U
X = Don’t care
BIT 6
X
BIT 5
TT
BIT 4
BIT 3
F/S
BIT 2
Refer to the full data sheet for this information.
BIT 1
SEG#
BIT 0
Bits 5:4: Target (TT). These bits specify the user memory page number (S/U = 1) to which the scratchpad data is to
be copied.
For S/U = 1, the assignments are:
00 User page 0
01 User page 1
10 (reserved)
11 (reserved)
Bit 3: Full or segment copy (F/S). This bit is relevant only is S/U = 1. It specifies whether the entire page is pro-
grammed or only the segment selected by SEG#. If F/S = 0, the entire page is programmed. If F/S = 1, only the selected
segment is programmed. If one block of a targeted page is write protected then the F/S bit is forced to 1.
Bits 2:0: Segment Number (SEG#). These bits are relevant only if (S/U = 1) and (F/S = 1). They specify the segment
of the selected user memory page to be programmed with scratchpad data. All codes are valid. The code 000b refers
to the first four bytes of the page, etc.
���������������������������������������������������������������� Maxim Integrated Products 15