DS21348 Просмотр технического описания (PDF) - Dallas Semiconductor -> Maxim Integrated

Номер в каталоге

Компоненты Описание

производитель

DS21348

3.3V E1/T1/J1 Line Interface

Dallas Semiconductor -> Maxim Integrated 

DS21348/Q348

DESCRIPTION

The DS21348 is a complete selectable E1 or T1 LIU for short-haul and long-haul applications.

Throughout the data sheet, J1 is represented wherever T1 exists. Receive sensitivity adjusts automatically

to the incoming signal and can be programmed for 0dB to 12 dB or 0dB to 43dB for E1 applications and

0dB to 30dB or 0dB to 36dB for T1 applications. The device can generate the necessary G.703 E1

waveshapes in 75Ω or 120Ω applications and DSX-1 line build outs or CSU line build outs of 0dB,

-7.5dB, -15dB, and -22.5dB for T1 applications. The crystal-less onboard jitter attenuator requires only a

2.048MHz MCLK for both E1 and T1 applications (with the option of using a 1.544MHz MCLK in T1

applications). The jitter attenuator FIFO is selectable to either 32 bits or 128 bits in depth and can be

placed in either the transmit or receive data paths. An X 2.048MHz output clock synthesized to RCLK is

available for use as a backplane system clock (where n = 1, 2, 4, or 8). The DS21348 has diagnostic

capabilities such as loopbacks and PRBS pattern generation/detection. 16-bit loop-up and loop-down

codes can be generated and detected. The device can be controlled via an 8-bit parallel muxed or

nonmuxed port, serial port, or used in hardware mode. The device fully meets all of the latest E1 and T1

specifications including ANSI T1.403-1999, ANSI T1.408, AT&T TR 62411, ITU G.703, G.704, G.706,

G.736, G.775, G.823, I.431, O.151, O.161, ETSI ETS 300 166, JTG.703, JTI.431, JJ-20.1, TBR12,

TBR13, and CTR4.

2 of 73

Share Link: