CXD2956AGL-1
Performance
• Tracking sensitivity: –152dBm (average) or less
• Acquisition sensitivity: –139dBm (average) or less in normal mode
–150dBm (average) or less in high sensitivity mode
∗ Reference data using the Sony's reference board when using both an antenna of 25dBi gain and a RF
amplifier with NF ≤ 2dB, 25dB gain.
• TTFF (Time to First Fix):
Time until initial position measurement after power-on with the following conditions:
Cold Start (without both ephemeris and almanac time): 50s (average) / 60s (95% possibility)
Warm Start (without ephemeris but with almanac time): 35s (average) / 40s (95% possibility)
Hot Start (with both ephemeris and almanac time): 2s (minimum) / 6s (95% possibility)
∗ Reference data with elevation angle of 5° or more and no interception environment with satellite powers
≥ –130dBm. (Not in high sensitivity mode)
Note) "95% possibility" means "position time with 95% possibility".
• Positioning accuracy:
2DRMS: approx. 5m
∗ Reference data with elevation angle of 5° or more and no interception environment with satellite powers
≥ –130dBm.
• Measurement data update time: 1s
• Current consumption:
40mW (average) while position calculating with tracking satellites in low power mode
90mW (average) while position calculating with acquiring and tracking satellites
∗ Reference data using the Sony's reference board when the reference clock input is 18.414MHz, and its
amplitude is 3.3V swing.
• 1PPS output
1µs or less precision, 1PPS outputs from ECLKOUT (Pin 97).
Note) These values are not guaranteed, depending on the conditions.
–2–