PJ3842B / PJ3843B
High Performance Current Mode Controller
FIGURE 32-SLOPE COMPENSATION
The buffered oscillator ramp can resistively summed with either the voltage
feedback or current sense inputs to provide slope compensation.
FIGURE 33-27 WATT OFF-LINE REGULATION
T1-Primary:45 Turns #26 AWG
Secondary ±12V :9 Turns #30 AWG (2 strands ) Bifiliar Wound
Secondary 5.0V: 4 Turns (six strands) #26 Hexfiliar Wound
L1-15μH at 5.0A, Coilcraft 27156.
L2.L3-25μH at 1.0A, Coilcraft 27157.
Secondary Feedback : 10 Turns #30 AWG (2 strands) Bifiliar Wound
Core: Ferroxcube EC35-3C8
Bobbin : Ferroxcube EC35PCB1
Gap: ≅ 0.10 ” for a primary inductance of 1.0mH
Line Regulation:5.0V
Line Regulation:±12V
Vin=95 to 130 Vac
=50mV or ±0.5%
=24mV or ±0.1%
Load Regulation:5.0V
Load Regulation:±12V
Vin=115Vac, Iout =1.0A to 4.0A
Vin=115Vac,Iout=100mA to 300mA
=300mV or ±3.0%
=60mV or ±0.25%
Output Ripple:5.0V
Vin=115Vac
40mVp-p
Output Ripple:±12V
80 Vp-p
Efficiency
Vin=115Vac
70%
All outputs are at nominal load currents unless otherwise noted.
11-14
2004/11.Rev B