CMPWR160SAR Просмотр технического описания (PDF) - California Micro Devices Corp
Номер в каталоге
Компоненты Описание
производитель
CMPWR160SAR Datasheet PDF : 10 Pages
| |||
CALIFORNIA MICRO DEVICES
Typical DC Characteristics
Unless stated otherwise, all DC characteristics were
measured at room temperature with a nominal VCC
supply voltage of 5V and an output capacitance of 10µF.
Resistive load conditions were used.
Line Regulation Characteristics of the regulator are
shown in Figure 1. At maximum rated load conditions
(500mA), a 100mV drop in regulation occurs when the
line voltage has collapses below 3.8V. For light load
conditions (5mA), regulation is maintained for line
voltages as low as 3.3V.
Load Regulation performance is shown from zero to
maximum rated load in Figure 2. A 10% to 100% change
of rated load, results in an output voltage change of less
than 10mV. This translates into an effective output
impedance of approximately 0.02Ω.
CMPWR160
3.35
5mA Load
3.30
500mA Load
3.25
3.20
3.15
3.10
3.05
3.0
3.5
4.0
4.5
5.0
VCC (V)
Figure 1. Line Regulation
3.40
3.35
3.30
3.25
3.20
0
200
400
600
Load Current (mA)
Figure 2. Load Regulation
Ground Current is shown across the entire range of
100
load conditions in Figure 3. The ground current increases
by 40µA across the range of load conditions. This
80
increase is due to the current limiting protective circuitry
becoming active.
60
40
20
0
0
200
400
600
Load Current (mA)
Figure 3. Ground Current
©2000 California Micro Devices Corp. All rights reserved. SmartOR™ is a trademark of California Micro Devices Corporation.
215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214
Fax: (408) 263-7846
4
www.calmicro.com
12/5/2000
Share Link: 