CMPWR160SAT Просмотр технического описания (PDF) - California Micro Devices Corp
Номер в каталоге
Компоненты Описание
производитель
CMPWR160SAT Datasheet PDF : 10 Pages
| |||
CALIFORNIA MICRO DEVICES
Typical Thermal Characteristics continued
Output Voltage (Rated) vs. Temperature
Figure 15 shows the regulator steady state performance
when fully loaded (500mA) from –25°C up to the rated
maximum temperature of 70°C. The output variation at
maximum load is approximately 20mV across the shown
operating temperature. This translates to a temperature
coefficient of approximately ±30ppm/°C.
CMPWR160
3.34
3.32
3.30
3.28
3.26
3.24
–25
0
25
50
Temperature (˚C)
Figure 15. VOUT Temperature Variation (500mA)
POR Voltage Threshold Temperature Variation
Figure 16 shows the POR threshold voltage variation
from –25°C up to the maximum rated junction tempera-
ture. The overall 150°C change in junction temperature
causes less than a 5mV variation in the POR threshold
voltage. This translates to a temperature coefficient of
±6ppm/°C.
The POR pulse duration does not vary with temperature.
3.00
2.95
2.90
2.85
3.24
–25
0
25
50
75
Temperature (˚C)
100 125
Figure 16. POR Threshold
Temperature Variation
VCC Supply Current Temperature Variation
Figure 17 shows the VCC supply current variation with
40
temperature from –25°C to the maximum rated junction
temperature with no load on the device. The supply
38
current changes less than 1µA over the entire 150°C
range shown in the plot.
36
34
32
30
–25
0
25
50
75 100 125
Temperature (˚C)
Figure 17. VCC Supply Current
vs. Temperature
©2000 California Micro Devices Corp. All rights reserved. SmartOR™ is a trademark of California Micro Devices Corporation.
215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214
Fax: (408) 263-7846
10
www.calmicro.com
12/5/2000
Share Link: 