B43760A5158M000 Просмотр технического описания (PDF) - EPCOS AG

Номер в каталоге

Компоненты Описание

производитель

B43760A5158M000

Capacitors with screw terminals Extra long useful life  105 °C

EPCOS AG 

B43740, B43760

Extra long useful life  105 °C

Special designs

Low-inductance design

For heat sink mounting

Design for optimal connection of capacitors to the heat sink when using base cooling with the

following features (refer to chapter "General technical information, 5.2 Cooling"):

 Electrical insulation of the capacitors base with 2 overlapping thermal pads for optimal heat

flow (minimal thermal resistance at the capacitor base)

 Minimal overall lengh tolerance (±0.35 mm) for mounting between heat sink and bus bar

 Case with extra groove near the base for clamp mounting (recommended ring clamp

B44030A0165B ... A0190B)

This version is available only for capacitors without threaded stud and for diameters ≥ 64.3 mm.

Regarding ripple current and useful life, please refer to column IAC,R(B) in the table "Technical

data and ordering codes" and in the useful life curves.

Ordering codes:

Design

Low inductance (13 nH)

For heat sink mounting

Identification in 3rd

block of ordering code

M003

M007

Remark

For capacitors with diameter d ≥ 64.3 mm

For capacitors with diameter d ≥ 64.3 mm and

without threaded stud

Please read Cautions and warnings and

Important notes at the end of this document.

Page 6 of 18

Share Link: