ATF22V10C-10GM Просмотр технического описания (PDF) - Atmel Corporation

Номер в каталоге

Компоненты Описание

производитель

ATF22V10C-10GM

High performance EE PLD

Atmel Corporation 

Logic Diagram

Description

The ATF22V10C is a high-performance CMOS (electrically erasable) programmable

logic device (PLD) that utilizes Atmel’s proven electrically erasable Flash memory tech-

nology. Speeds down to 5 ns and power dissipation as low as 100 µA are offered. All

speed ranges are specified over the full 5V ± 10% range for industrial temperature

ranges, and 5V ± 5% for commercial temperature ranges.

Several low-power options allow selection of the best solution for various types of

power-limited applications. Each of these options significantly reduces total system

power and enhances system reliability.

Absolute Maximum Ratings*

Temperature under Bias .................................. -40°C to +85°C

Storage Temperature ..................................... -65°C to +150°C

Voltage on Any Pin with

Respect to Ground .........................................-2.0V to +7.0V(1)

Voltage on Input Pins

with Respect to Ground

during Programming .....................................-2.0V to +14.0V(1)

Programming Voltage with

Respect to Ground .......................................-2.0V to +14.0V(1)

*NOTICE:

Stresses beyond those listed under “Absolute

Maximum Ratings” may cause permanent dam-

age to the device. This is a stress rating only and

functional operation of the device at these or any

other conditions beyond those indicated in the

operational sections of this specification is not

implied. Exposure to absolute maximum rating

conditions for extended periods may affect device

reliability.

Note:

1. Minimum voltage is -0.6V DC, which may under-

shoot to -2.0V for pulses of less than 20 ns.

Maximum output pin voltage is VCC + 0.75V DC,

which may overshoot to 7.0V for pulses of less

than 20 ns.

DC and AC Operating Conditions

Operating Temperature (Ambient)

Commercial

0°C - 70°C

VCC Power Supply

5V ± 5%

Industrial

-40°C - 85°C

5V ± 10%

2 ATF22V10C(Q)

0735P–PLD–01/02

Share Link: