AT90S8515 Просмотр технического описания (PDF) - Atmel Corporation
Номер в каталоге
Компоненты Описание
производитель
AT90S8515 Datasheet PDF : 112 Pages
| |||
General-purpose
Register File
X-register, Y-register and
Z-register
Figure 6 shows the structure of the 32 general-purpose working registers in the CPU.
Figure 6. AVR CPU General-purpose Working Registers
General
Purpose
Working
Registers
7
0 Addr.
R0
$00
R1
$01
R2
$02
…
R13
$0D
R14
$0E
R15
$0F
R16
$10
R17
$11
…
R26
$1A
X-register low byte
R27
$1B
X-register high byte
R28
$1C
Y-register low byte
R29
$1D
Y-register high byte
R30
$1E
Z-register low byte
R31
$1F
Z-register high byte
All the register operating instructions in the instruction set have direct and single-cycle
access to all registers. The only exception are the five constant arithmetic and logic
instructions SBCI, SUBI, CPI, ANDI and ORI between a constant and a register and the
LDI instruction for load immediate constant data. These instructions apply to the second
half of the registers in the register file (R16..R31). The general SBC, SUB, CP, AND and
OR and all other operations between two registers or on a single register apply to the
entire register file.
As shown in Figure 6, each register is also assigned a data memory address, mapping
them directly into the first 32 locations of the user Data Space. Although not being phys-
ically implemented as SRAM locations, this memory organization provides great
flexibility in access of the registers, as the X-, Y- and Z-registers can be set to index any
register in the file.
The registers R26..R31 have some added functions to their general-purpose usage.
These registers are address pointers for indirect addressing of the Data Space. The
three indirect address registers X, Y, and Z are defined as:
Figure 7. X-, Y-, and Z-registers
15
0
X - register
7
07
0
R27 ($1B)
R26 ($1A)
15
Y - register
7
15
Z - register
7
10 AT90S8515
R29 ($1D)
R31 ($1F)
07
07
0
0
R28 ($1C)
0
0
R30 ($1E)
0841G–09/01
Share Link: 