DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

AT90S1200 Просмотр технического описания (PDF) - Atmel Corporation

Номер в каталоге
Компоненты Описание
производитель
AT90S1200 Datasheet PDF : 71 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Figure 17. Watchdog Reset during Operation
AT90S1200
Interrupt Handling
General Interrupt Mask
Register GIMSK
The AT90S1200 has two Interrupt Mask Control Registers: the GIMSK (General Inter-
rupt Mask Register) at I/O space address $3B and the TIMSK (Timer/Counter Interrupt
Mask Register) at I/O address $39.
When an interrupt occurs, the Global Interrupt Enable I-bit is cleared (zero) and all inter-
rupts are disabled. The user software can set (one) the I-bit to enable interrupts. The I-
bit is set (one) when a Return from Interrupt instruction (RETI) is executed.
When the Program Counter is vectored to the actual interrupt vector in order to execute
the interrupt handling routine, hardware clears the corresponding flag that generated the
interrupt. Some of the interrupt flags can also be cleared by writing a logic one to the flag
bit position(s) to be cleared.
If an interrupt condition occurs when the corresponding interrupt enable bit is cleared
(zero), the interrupt flag will be set and remembered until the interrupt is enabled, or the
flag is cleared by software.
If one or more interrupt conditions occur when the global interrupt enable bit is cleared
(zero), the corresponding interrupt flag(s) will be set and remembered until the global
interrupt enable bit is set (one), and will be executed by order of priority.
Note that external level interrupt does not have a flag, and will only be remembered for
as long as the interrupt condition is active.
Note that the Status Register is not automatically stored when entering an interrupt rou-
tine and restored when returning from an interrupt routine. This must be handled by
software.
Bit
7
6
5
4
$3B
-
INT0
-
-
Read/Write
R
R/W
R
R
Initial Value
0
0
0
0
3
2
1
0
-
-
-
-
GIMSK
R
R
R
R
0
0
0
0
Bit 7 Res: Reserved Bit
This bit is a reserved bit in the AT90S1200 and always reads as zero.
15
0838HAVR03/02

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]