AMMC-6241-W10 Просмотр технического описания (PDF) - Avago Technologies

Номер в каталоге

Компоненты Описание

производитель

AMMC-6241-W10

26–43 GHz Low Noise Amplifier

Avago Technologies 

AMMC-6241

26–43 GHz Low Noise Amplifier

Data Sheet

Chip Size: 1900 x 800 mm (74.8 x 31.5 mils)

Chip Size Tolerance: ± 10 mm (± 0.4 mils)

Chip Thickness: 100 ± 10 mm (4 ± 0.4 mils)

RF Pad Dimensions: 110 x 90 mm (4.3 x 3.5 mils)

DC Pad Dimensions: 100 x 100 mm (3.9 x 3.9 mils)

Description

Avago Technologies AMMC-6241 is a high gain, low-noise

amplifier that operates from 26 GHz to 43 GHz. This LNA

provides a wide-band solution for system design since

it covers several bands, thus, reduces part inventory.

The device has input / output match to 50 Ohm, is un-

conditionally stable and can be used as either primary

or sub-sequential low noise gain stage. By eliminating

the complex tuning and assembly processes typically

required by hybrid (discrete-FET) amplifiers, the AMMC-

6241 is a cost-effective alternative in the 26 - 43 GHz com-

munications receivers. The backside of the chip is both RF

and DC ground. This helps simplify the assembly process

and reduces assembly related performance variations

and costs. It is fabricated in a PHEMT process to provide

exceptional noise and gain performance. For improved

reliability and moisture protection, the die is passivated

at the active areas.

AMMC-6241 Absolute Maximum Ratings [1]

Symbol Parameters/Conditions

Vd

Positive Drain Voltage

Units Min. Max.

V

7

Vg

Gate Supply Voltage

V

NA

Id

Drain Current

mA

100

Pin

CW Input Power

dBm

15

Tch

Operating Channel Temp. °C

+150

Tstg

Storage Case Temp.

°C -65 +150

Tmax Maximum Assembly

°C

Temp (60 sec max)

+300

Features

• Wide frequency range: 26 - 43 GHz

• High gain: 20 dB

• Low 50 Ω Noise Figure: 2.7 dB

• 50 Ω Input and Output Match

• Flat Gain Response

• Single 3V Supply Bias

Applications

• Microwave Radio systems

• Satellite VSAT, DBS Up/Down Link

• LMDS & Pt-Pt mmW Long Haul

• Broadband Wireless Access

(including 802.16 and 802.20 WiMax)

• WLL and MMDS loops

Note: These devices are ESD sensitive. The fol-

lowing precautions are strongly recommended.

Ensure that an ESD approved carrier is used

when dice are transported from one destination

to another. Personal grounding is to be worn at

all times when handling these devices.

For more details, refer to Avago Technologies

Application Note A004R:

Electrostatic Discharge Damage and Control.

ESD Machine Model (Class A)

ESD Human Body Model (Class 0)

Note: Operation in excess of any one of these conditions may result in

permanent damage to this device.

Share Link: