ADSP-2196MKCA-160X Просмотр технического описания (PDF) - Analog Devices

Номер в каталоге

Компоненты Описание

производитель

ADSP-2196MKCA-160X

DSP Microcomputer

Analog Devices 

35(/,0,1$5< 7(&+1,&$/ '$7$

ADSP-2196

For current information contact Analog Devices at 800/262-5643

ABSOLUTE MAXIMUM RATINGS

VDDINTInternal (Core) Supply Voltage1,2 .......–0.3 to 3.0 V

VDDEXTExternal (I/O) Supply Voltage ............–0.3 to 4.6 V

VIL–VIHInput Voltage ......................–0.5 to VDDEXT+0.5 V

VOL–VOHOutput Voltage Swing ........–0.5 to VDDEXT+0.5 V

CLLoad Capacitance............................................ 200 pF

tCCLKCore Clock Period........................................ 6.25 ns

fCCLKCore Clock Frequency.............................. 160 MHz

tHCLKPeripheral Clock Period...................................10 ns

fHCLKPeripheral Clock Frequency...................... 100 MHz

TSTOREStorage Temperature Range .............. –65 to 150ºC

TLEADLead Temperature (5 seconds)...................... 185ºC

1Specifications subject to change without notice.

2Stresses greater than those listed above may cause permanent damage to the device.

These are stress ratings only, and functional operation of the device at these or any

other conditions greater than those indicated in the operational sections of this

specification is not implied. Exposure to absolute maximum rating conditions for

extended periods may affect device reliability.

September 2001

ESD SENSITIVITY

CAUTION:

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000V

readily accumulate on the human body and test equipment and can discharge without

detection. Although the ADSP-2196 features proprietary ESD protection circuitry,

permanent damage may occur on devices subjected to high-energy electrostatic

discharges. Therefore, proper ESD precautions are recommended to avoid perfor-

mance degradation or loss of functionality.

TIMING SPECIFICATIONS

This section contains timing information for the DSP’s external signals.

24

This information applies to a product under development. Its characteristics and specifications are subject to change with-

REV. PrA

out notice. Analog Devices assumes no obligation regarding future manufacturing unless otherwise agreed to in writing.

Share Link: