ADL5372
Data Sheet
Parameter
Test Conditions/Comments
Min Typ
LO INPUTS
LO Drive Level1
Characterization performed at typical level
−6 0
Input Return Loss
See Figure 9 for a plot of return loss vs. frequency
−12
BASEBAND INPUTS
Pin IBBP, Pin IBBN, Pin QBBP, Pin QBBN
I and Q Input Bias Level
500
Input Bias Current
Current sourcing from each baseband input with a bias of 500 mV dc2
45
Input Offset Current
0.1
Differential Input Impedance
2900
Bandwidth (0.1 dB)
LO = 1900 MHz, baseband input = 700 mV p-p sine wave on 500 mV dc
70
Bandwidth (1 dB)
LO = 1900 MHz, baseband input = 700 mV p-p sine wave on 500 mV dc
350
POWER SUPPLIES
Pin VPS1 and Pin VPS2
Voltage
4.75
Supply Current
165
1 High LO drive reduces noise at a 6 MHz carrier offset in GSM applications.
2 See V-to-I Converter section for architecture information.
Max Unit
+6 dBm
dB
mV
μA
μA
kΩ
MHz
MHz
5.25 V
mA
Rev. A | Page 4 of 24