RP20-123.3SE Просмотр технического описания (PDF) - RECOM Electronic GmbH
Номер в каталоге
Компоненты Описание
производитель
RP20-123.3SE Datasheet PDF : 4 Pages
| |||
POWERLINE
DC/DC-Converter
RP20-S_D_TE
Series
Specifications (typical at nominal input and 25°C unless otherwise noted)
Minimum Load (see Note 1)
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
Cross Regulation (see Note 9)
Ripple and Noise (20MHz bandwith)
Single (W)
Dual (W)
Triple 3.3V, 5V
Auxiliary
Single
Dual
Triple 3.3V, 5V
Auxiliary
Dual
Triple 3.3V, 5V
Auxiliary
Single
Dual
Triple 3.3V, 5V
Auxiliary
10% of full load
±0.2%
±0.5%
±1%
±5%
±0.5%
±3%
±2%
±5%
±5%
±2%
±5%
75mVp-p
100mVp-p
50mVp-p
1% of Vout
Temperature Coefficient
±0.02%/°C max.
Transient Response (25% load step change)
Over Voltage Protection
3.3V
Zener diode clamp (only single)
5V
12V
15V
500µs
3.9V
6.2V
15V
18V
Short Circuit Protection
Hiccup, automatic recovery
Efficiency
see „Selection Guide“ table
Isolation Voltage
1600VDC min.
Isolation Resistance
1 GΩ min.
Isolation Capacitance
300pF max.
Operating Frequency
300kHz typ.
Approved to Safety Standards (see Note 10)
UL 1950, EN60950
Operating Temperature Range
-40°C to +85°C(with derating)
Maximum Case Temperature
+100°C
Storage Temperature Range
Thermal Impedance
(see Note 8)
Natural convection
Natural convection with Heat Sink
-55°C to +105°C
10°C/Watt
8.24°C/Watt
Thermal Shock
MIL-STD-810D
Vibration
10-55Hz, 2G, 30 Min. along X, Y and Z
Relative Humidity
5% to 95% RH
Case Material
Nickel plated copper
Base Material
Non-conductive black plastic
Potting Material
Conducted Emissions (see Note 11)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Epoxy (UL94-V0)
Level A
Level A
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
Perf. Criteria 2
continued on next page
www.recom-international.com
July-2006
249
Share Link: 