82541GI Просмотр технического описания (PDF) - Intel

Номер в каталоге

Компоненты Описание

производитель

82541GI

82541 Family of Gigabit Ethernet Controllers

Intel 

3.0

3.1

3.2

Networking Silicon — 82541(PI/GI/EI)

Signal Descriptions

Signal Type Definitions

The signals of the 82541(PI/GI/EI) controller are electrically defined as follows:

Name

I

O

TS

STS

OD

A

P

Definition

Input. Standard input only digital signal.

Output. Standard output only digital signal.

Tri-state. Bi-directional tri-state digital input/output signal.

Sustained Tri-state. An active low tri-state signal owned and driven by only one agent at a

time. The agent that drives an STS pin low must drive it high for at least one clock before letting

it float. A new agent cannot start driving an STS signal any sooner than one clock after the

previous owner tri-states it. A pull-up resistor is required to sustain the inactive state until

another agent drives it, and must be provided by the central resource.

Open Drain. Wired-OR with other agents.

The signaling agent asserts the OD signal, but the signal is returned to the inactive state by a

weak pull-up resistor. The pull-up resistor may require two or three clock periods to fully restore

the signal to the de-asserted state.

Analog. PHY analog data signal.

Power. Power connection, voltage reference, or other reference connection.

PCI Bus Interface Signals (56)

When the Reset signal (RST#) is asserted, the 82541(PI/GI/EI) will not drive any PCI output or bi-

directional pins. The Power Management Event signal (PME#) can be active by configuring

manageability functions.

11

Share Link: