8x931AA, 8x931HA USB PERIPHERAL CONTROLLER
5.0 ELECTRICAL CHARACTERISTICS
ABSOLUTE MAXIMUM RATINGS†
Ambient Temperature Under Bias................... –40°C to +85°C
Storage Temperature .................................. –65°C to +150°C
Voltage on Any Pins to VSS .............................–0.5 V to +6.5 V
IOL per I/O Pin ................................................................. 15 mA
Power Dissipation (1) ..................................................... 1.5 W
NOTICE: This document contains information on
products in the sampling and initial production
phases of development. The specifications are
subject to change without notice.Verify with your
local Intel sales office that you have the latest
datasheet before finalizing a design.
OPERATING CONDITIONS†
TA (Ambient Temperature Under Bias):
Commercial ........................................................ -0°C to +70°C
VCC (Digital Supply Voltage) .......................... 4.40 V to 5.25 V
VSS...................................................................................... 0 V
AVCC (Analog Supply Voltage) ...................... 4.40 V to 5.25 V
FOSC ............................................................................. 12 MHz
† WARNING: Stressing the device beyond the
“Absolute Maximum Ratings” may cause
permanent damage. These are stress ratings
only. Operation beyond the “Operating
Conditions” is not recommended and extended
exposure beyond the “Operating Conditions”
may affect device
reliability.
NOTE:
1. Maximum power dissipation is based on package
heat-transfer limitations, not device power
consumption.
Table 9. 8x931AA/8x931HA Supply Voltages
Parameter
Condition
Symbol
Min
Max
Supply Voltage
8x931HA Vcc/Vbus 4.40V
5.25V
8x931AA Vcc/Vbus 4.15V†
5.25V
†For bus-powered device, voltage droop during hot plug may cause the supply voltage to drop
to 4V worst case. The functionality of the device is supported at this voltage.
ADVANCE INFORMATION
13