MAX674CPA(2004) Просмотр технического описания (PDF) - Maxim Integrated
Номер в каталоге
Компоненты Описание
производитель
MAX674CPA Datasheet PDF : 5 Pages
| |||
+10V Precision Voltage Reference
ABSOLUTE MAXIMUM RATINGS
Input Voltage .........................................................................40V
Power Dissipation
TO-99 (TV) (derate at 7.1mW/ C above +80°C)...........500mW
CERDIP (J) (derate at 6.7mW/ C above +75°C) ..........500mW
Plastic DIP (P) (derate at 5.6mW/ C above +36°C) .....500mW
Narrow SO (S) (derate at 5.0mW/ C above +55°C) .....300mW
Storage Temperature Range .............................-65°C to +150°C
Operating Temperature Range
MAX674C ............................................................0°C to +70°C
MAX674E .........................................................-40°C to +85°C
MAX674M ......................................................-55°C to +125°C
Dice Junction Temperature (TJ) ........................-65°C to +150°C
Output Short-Circuit Duration
(to Ground or VIN)......................................................Indefinite
Lead Temperature (soldering, 60s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VIN = +15V, TA = +25°C, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Output Voltage Tolerance
IL = 0mA
±15
mV
Output Voltage Temperature
Coefficient (Note 1)
TCVO
MAX674CTV/CPA/CSA
MAX674ETV/EJA/EPA/ESA
MAX674MTV/MJA
12
15 ppm/°C
20
Output Adjustment Range
VTRIM Rp = 10
±300 ±600
mV
Line Regulation (Note 2)
Load Regulation (Note 2)
VIN = 13V to 33V
IL = 0 to 10mA
0.006
0.001
0.01
0.002
%/V
%/mA
Turn-On Settling Time
tON
To ±0.1% of final value
5
µs
Quiescent Supply Current
IQ
No load
750 1400
µA
Noise (Note 3)
Sink Current
Short-Circuit Current
eN(P-P)
IS
ISC
0.1Hz to 10Hz
VOUT = 0V
20
30
µVP-P
0.3
0.5
mA
30
mA
Note 1: Temperature coefficient is measured by the “box” method, i.e., the maximum ∆VOUT is divided by ∆T.
Note 2: Line and load regulation specifications include the effect of self-heating.
Note 3: Guaranteed by design for MAX674CPA, MAX674CSA, MAX674EPA, MAX674ESA; sample tested for all other grades and
packages.
2 _______________________________________________________________________________________
Share Link: 