TDA7010T Просмотр технического описания (PDF) - Philips Electronics
Номер в каталоге
Компоненты Описание
производитель
TDA7010T Datasheet PDF : 11 Pages
| |||
Philips Semiconductors
FM radio circuit
Product specification
TDA7010T
GENERAL DESCRIPTION
The TDA7010T is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral
components is important (small dimensions and low costs).
The IC has an FLL (Frequency-Locked-Loop) system with an intermediate frequency of 70 kHz. The i.f. selectivity is
obtained by active RC filters. The only function which needs alignment is the resonant circuit for the oscillator, thus
selecting the reception frequency. Spurious reception is avoided by means of a mute circuit, which also eliminates too
noisy input signals. Special precautions are taken to meet the radiation requirements.
The TDA7010T includes the following functions:
• R.F. input stage
• Mixer
• Local oscillator
• I.F. amplifier/limiter
• Phase demodulator
• Mute detector
• Mute switch
QUICK REFERENCE DATA
Supply voltage range (pin 4)
Supply current at VP = 4,5 V
R.F. input frequency range
Sensitivity for −3 dB limiting
(e.m.f. voltage)
(source impedance: 75 Ω; mute disabled)
Signal handling (e.m.f. voltage)
(source impedance: 75 Ω)
A.F. output voltage at RL = 22 kΩ
VP
2,7 to 10 V
IP
typ. 8 mA
frf
1,5 to 110 MHz
EMF typ. 1,5 µV
EMF
Vo
typ. 200 mV
typ. 75 mV
PACKAGE OUTLINE
16-lead mini-pack; plastic (SO16; SOT109A); SOT109-1; 1996 July 24.
September 1983
2
Share Link: 