AM5890S Просмотр технического описания (PDF) - Unspecified
Номер в каталоге
Компоненты Описание
производитель
AM5890S Datasheet PDF : 12 Pages
| |||
AM5890S
Motor Driver ICs
5-channel BTL Driver for DVD player
AM5890S
The AM5890S is a five-channel BTL driver IC for driving the motors and actuators such as used in DVD player and
consists of two independent precision voltage regulators with adjustable range from 1.25V to 4 V. In addition, an
under voltage detection circuit is built to do Resetting Function. Also, Package is Pb free for environmental
protection.
Applications
BTL driver for CD, CD-ROM and DVD.
Features
1) Two channels are voltage-type BTL drivers for
actuators of tracking and focus. Two channels are
voltage-type BTL driver for sled and spindle
motors. It is also built-in one channel bi-direction
DC motor driver for tray.
2) Wide dynamic range [9.0V (typ.) when Vcc1=
Vcc2= 12V, at RL= 20Ω load].
3) Separating power of Vcc1 and Vcc2 is to
improve power efficiency by a low supply
voltage for tracking, focus, and spindle.
4) Level shift circuit built-in.
5) Thermal shut down circuit built-in.
6) Mute mode built-in.
7) Dual actuator drivers:
A general purpose input OP provides differential
input for signal addition. The output structure is
two power OPAMPS in bridge configuration.
8) Sled motor driver:
A general purpose input OP provides differential
input for signal addition. The output structure is
one power OPAMP in bridge configuration.
9) Spindle driver:
Single input linear BTL driver. The output
structure are two power OPAMPS in bridge
configuration.
10) Tray in-out driver:
The DC motor driver supports forward/reverse
control for tray motor.
11) 2 Built-in regulator controllers
Adjustable range 1.25V ~ 4V
12) Under voltage detection
AMtek SEMICONDUCTORS
-1-
May 2010 V1.5TS
Share Link: 