DATA SHEET
FEATURES (Continued)
Interrupt Controller
• 34 Interrupt sources.
(3 for Timers, 6 for UART, 8 for External
interrupts, 4 for DMA, 2 for RTC, 2 for IIC, 2 for
RCSR (Remote Control Signal Receiver), and 7
for PCI))
• Software polling Interrupt mode
• Selectable level- or edge-triggered external
interrupts source
• Programmable IRQ/FIQ for each interrupt
request
• Supports FIQ (Fast Interrupt Request) for very
urgent interrupt request
Timer
• 3-ch 16-bit Timer with DMA-based or interrupt-
based operation
Watchdog Timer
• 16-bit Watchdog Timer
RCSR (Remote Control Signal Receiver)
• 8-step FIFO
• FIFO interrupt is generated on full (8) step
overflow
RTC (Real Time Clock)
• Full clock feature: sec, min, hour, date, day,
week, month, and year
• 32.768 kHz input clock
• Alarm interrupt
• Time tick interrupt
GPIO (General-Purpose Input/Output) Ports
• 8 external interrupt ports
• 44 multiplexed input/output ports.
S3C2800 MICROCONTROLLER
UART
• 2-channel UART with DMA-based or interrupt
based operation
• Supports 5-bit, 6-bit, 7-bit, or 8-bit serial data
transmit/receive
• Supports hardware handshaking during
transmit/receive operation
• Programmable baud rates (up to 230.4Kbps).
• Supports IrDA 1.0 (up to 115.2Kbps)
• Loop back mode for testing
• Program accessible 16-byte FIFO (2x16 byte
FIFO for transmit/receive data)
DMA Controller
• 4-channel general-purpose Direct Memory
Access controller without CPU intervention.
• Support memory to memory, memory to I/O and
I/O to I/O DMA operations of the following 6
types:
Software, 3 internal function blocks (UART0,
UART1, Timer), and 2 External requests
• Burst transfer mode to enhance the transfer rate
on the FPDRAM, EDODRAM and SDRAM
IIC-BUS Interface
• 2-ch Multi-Master IIC-Bus with interrupt-based
operation
• Serial, 8-bit oriented, bi-directional data
transfers at up to 100 Kbit/s in the standard
mode or up to 400 Kbit/s in the fast mode
Operating Voltage Range
• Core: 1.8 V -0.1 V/+0.15 V
• I/O: 3.3 V ± 0.3 V
Operating Frequency
• Up to 200 MHz.
Package
• 208-pin LQFP
3