PRELIMINARY
CY7C1310V18
CY7C1312V18
CY7C1314V18
Maximum Ratings
Current into Outputs (LOW)......................................... 20 mA
(Above which the useful life may be impaired. For user guide-
lines, not tested.)
Storage Temperature .................................–65°C to +150°C
Static Discharge Voltage.......................................... > 2001V
(per MIL-STD-883, Method 3015)
Latch-up Current.................................................... > 200 mA
Ambient Temperature with
Power Applied............................................. –55°C to +125°C
Supply Voltage on VDD Relative to GND........ –0.5V to +2.9V
DC Voltage Applied to Outputs
in High-Z State[12] ............................... –0.5V to VDDQ + 0.5V
DC Input Voltage[12] ............................ –0.5V to VDDQ + 0.5V
Operating Range
Range
Com’l
Ambient
Temperature[10]
0°C to +70°C
VDD
1.8 ± 100 mV
VDDQ
1.4V to VDD
Electrical Characteristics Over the Operating Range[1, 11]
Parameter
Description
Test Conditions
Min.
Typ.
Max.
Unit
VDD
VDDQ
VOH
VOL
VIH
VIL
IX
IOZ
Power Supply Voltage
1.7
1.8
1.9
V
I/O Supply Voltage
1.4
1.5
VDD
V
Output HIGH Voltage IOH = −2.0 mA, Nominal Impedance VDDQ – 0.2 VDDQ – 0.2
VDDQ
V
Output LOW Voltage
Input HIGH Voltage[12]
Input LOW Voltage[12]
IOL = 2.0 mA, Nominal Impedance
VSS
VSS
0.2
V
VREF + 0.1 VREF + 0.1 VDDQ+0.3 V
–0.3
VREF – 0.1 VREF – 0.1 V
Input Load Current
GND ≤ VI ≤ VDDQ
−5
−5
5
µA
Output Leakage
GND ≤ VI ≤ VDDQ, Output Disabled
−5
−5
Current
5
µA
VREF
Input Reference
Voltage[13]
Typical Value = 0.75V
0.68
0.75
0.95
V
IDD
VDD Operating Supply VDD = Max., IOUT = 0 mA, 133 MHz
x8, x18
f = fMAX = 1/tCYC
167 MHz
TBD
mA
TBD
mA
200 MHz
TBD
mA
IDD
VDD Operating Supply VDD = Max., IOUT = 0 mA, 133 MHz
x36
f = fMAX = 1/tCYC
167 MHz
TBD
mA
TBD
mA
200 MHz
TBD
mA
ISB1
Automatic
Max. VDD, Both Ports 133 MHz
Power-down
Current, x8, x18
Deselected, VIN ≥ VIH or
VIN ≤ VIL f = fMAX =
1/tCYC, Inputs Static
167 MHz
200 MHz
TBD
mA
TBD
mA
TBD
mA
ISB1
Automatic
Power-down
Current, x36
Max. VDD, Both Ports
Deselected, VIN ≥ VIH or
VIN ≤ VIL f = fMAX =
1/tCYC, Inputs Static
133 MHz
167 MHz
200 MHz
TBD
mA
TBD
mA
TBD
mA
Notes:
10. Ambient Temperature = TA. This is the case temperature.
11. All Voltage referenced to Ground.
12. Overshoot: VIH(AC)<VDD + 0.5V for t < tTCYC/2; undershoot VIL(AC)< − 0.5V for t < tTCYC/2; power-up: VIH<1.8V and VDD<1.8V and VDDQ < 1.4V for t <
200 ms.
13. VREF Min. = 0.68V or 0.46VDDQ, whichever is larger, VREF Max. = 0.95V or 0.54VDDQ, whichever is smaller.
Document #: 38-05180 Rev. *A
Page 11 of 25