Dimensions HTA 100 .. 1000-S (in mm. 1 mm = 0.0394 inch)
Dimensions HTA 100..1000-S (in mm. 1 mm = 0.0394 inch)
Bottom view
Left view
SSeecocnodnadryatreyrmteinrmalsinals
Terminal 1
TTeermrmininaal l12
TTeermrmininaal l23
TTeermrmininaal l34
: supply voltage + 15 V
: Supply: svuopltapglyev+ol1ta5gVe - 15 V
: Supply: ovoulttpaugte - 15 V
: Output: 0V
Terminal 4 : 0V
MecFhraonnitcavliecwharacteristics
●● General tolerance
± 0.5 mm
●● MPriemcahryatnhriocuaglh-chohlearacteristics Ø 32 mm
●● Connection of secondary
Molex 5045-04A
• General tolerance
± 0.5 mm
• Primary through-hole
Ø 32 mm
• Connection of secondary Molex 5045-04A
Remarks
●●●●SVTaeOfmUeTptiseyrpaotusriteivoef
when IP flows in the direction of the arrow.
the primary conductor should not exceed
90°C.
●● This is a standard model. For different versions (supply
Tvhoisltatrgaenss,dsuecceornmduasryt bcoenunseecdtioinnse,leucntirdicir/eecleticotnroanl ic equipment
wmithearessupreemctetnotsa,poppliecraabtilnegstteamndpaerrdastuarensd, seatcfe.,t)yprleeqauseirements
incoanctcaocrtduasn.ce with the manufacturer's operating instructions.
Remarks
• VOUT is positive when IP flows in the direction of the arrow.
• Temperature of the primary conductor should not exceed
90°C.
• This is a standard model. For different versions (supply
voltages, secondary connections, unidirectional measure-
ments, operating temperatures, etc.) please contact us.
Caution, risk of electrical shock
When operating the transducer, certain parts of the module can
carry hazardous voltage (eg. primary busbar, power supply).
Ignoring this warning can lead to injury and/or cause serious
damage.
This transducer is a built-in device, whose conducting parts
must be inaccessible after installation.
A protective housing or additional shield could be used.
Main supply must be able to be disconnected.
Page 3/3
090430/6
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.
www.lem.com
080516/5
LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.
Page 2/2
www.lem.com