SM16LC03C-6 Просмотр технического описания (PDF) - Microsemi Corporation
Номер в каталоге
Компоненты Описание
производитель
SM16LC03C-6 Datasheet PDF : 2 Pages
| |||
8700 E. Thomas Road
Scottsdale, AZ 85251
Tel: (480) 941-6300
Fax: (480) 947-1503
SM16LC03C-6
thru
SM16LC24C-6
TVSarray™ Series
DESCRIPTION (300 watt)
This 16 pin 6 line Low Capacitance Bidirectional array is designed for
use in applications where protection is required at the board level from
voltage transients caused by electrostatic discharge (ESD) as defined
in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and
effects of secondary lighting.
These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays
have a peak power of 300 watts for an 8/20 µsec pulse and are designed to protect 3.0/3.3 volt
components such as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 volts.
FEATURES
• Protects 3.0/3.3 up through 24V Components
• Protects 6 lines Bi-directional
• Provides electrically isolated protection
• SO-16 Packaging
MECHANICAL
• Molded SO-16 Surface Mount
• Weight: 2.5 grams (approximate)
• Body Marked with Logo, and device number
• Pin #1 defined by DOT on top of package
MAXIMUM RATINGS
• Operating Temperatures: -550C to +1500C
• Storage Temperature: -550C to +1500C
• Peak Pulse Power: 300 Watts (8/20 µsec, Figure 1)
• Pulse Repetition Rate: <.01%
PACKAGING
• Tape & Reel EIA Standard 481-1-A
• 13 inch reel 2,500 pieces (OPTIONAL)
• Carrier tubes 50 pieces per (STANDARD)
ELECTRICAL CHARACTERISTICS@ 250C Unless otherwise specified
PART
NUMBER
DEVICE
MARKING
STAND
OFF
VOLTAGE
VWM
VOLTS
BREAKDOWN
VOLTAGE
VBR
@1 mA
VOLTS
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
MAX
MIN
MAX
MAX
SM16LC03C-6 MAL
3.3
4
7
9
SM16LC05C-6 MAM
5.0
6
9.8
11
SM16LC12C-6 MAN
12
13.3
19
24
SM16LC15C-6 MAO
15
16.7
24
30
SM16LC24C-6 MAP
24
26.7
43
55
LEAKAGE
CURRENT
ID
@ VWM
CAPACITANCE
(f=1 MHz)
@0V
C
µA
pF
MAX
TYP
200
25
100
25
1
25
1
25
1
25
TEMPERATURE
COEFFICIENT
OF VBR
áVBR
mV/°C
MAX
-3
1
8
11
28
NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off voltage VWM. Product
selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected.
Application: The SM16LCXXC-6 product is designed for transient voltage suppression protection of components at
the board level. It is an ideal product to be used for protection of I/O Transceivers.
MSC0979.PDF
ISO 9001 CERTIFIED
REV D 8/25/99
Share Link: 