IDT72401 Просмотр технического описания (PDF) - Integrated Device Technology

Номер в каталоге

Компоненты Описание

производитель

IDT72401

CMOS PARALLEL FIFO 64 x 4-BIT AND 64 x 5-BIT

Integrated Device Technology 

IDT72401, IDT72402, IDT72403, IDT72404

CMOS PARALLEL FIFO 64 x 4-BIT AND 64 x 5-BIT

MILITARY AND COMMERCIAL TEMPERATURE RANGES

Data Output

Data is shifted out on the HlGH-to-LOW transition of Shift

Out (SO). This causes the internal read pointer to be

advanced to the next word location. If data is present, valid

data will appear on the outputs and Output Ready (OR) will

go HIGH. If data is not present, Output Ready will stay

LOW indicating the FIFO is empty. The last valid word read

from the FIFO will remain at the FlFOs output when it is empty.

When the FIFO is not empty, Output Ready (OR) goes LOW

on the LOW-to-HIGH transition of Shift Out. Previous data

remains on the output until the HIGH-to-LOW transition of

Shift Out (SO).

Fall-Through Mode

The FIFO operates in a fall-through mode when data gets

shifted into an empty FIFO. After a fall-through delay the data

propagates to the output. When the data reaches the output,

the Output Ready (OR) goes HIGH. Fall-through mode also

occurs when the FIFO is completely full. When data is shifted

out of the full FIFO, a location is available for new data. After

a fall-through delay, the Input Ready goes HIGH. If Shift In is

HIGH, the new data can be written to the FIFO.

Since these FlFOs are based on an internal dual-port RAM

architecture with separate read and write pointers, the fall-

through time (tPT) is one cycle long. A word may be written

into the FIFO on a clock cycle and can be accessed on the next

clock cycle.

TIMING DIAGRAMS

SHIFT IN

INPUT READY

INPUT DATA

tSIH

t IDH

t IDS

1/fIN

t SIL

1/fIN

tIRH

tIRL

Figure 2. Input Timing

2747 drw 07

(7)

SHIFT IN

(2)

(1)

INPUT READY

(4)

(5)

(3)

INPUT DATA

STABLE DATA

NOTES:

1. Input Ready HIGH indicates space is available and a Shift In pulse may be applied.

2. Input Data is loaded into the first word.

3. Input Ready goes LOW indicating the first word is full.

4. The write pointer is incremented.

5. The FIFO is ready for the next word.

6. If the FIFO is full then the Input Ready remains LOW.

7. Shift In pulses applied while Input Ready is LOW will be ignored (see Figure 4).

Figure 3. The Mechanism of Shifting Data Into the FIFO

(6)

2747 drw 08

5.01

5

Share Link: