AT88SC0204C-MP Просмотр технического описания (PDF) - Atmel Corporation

Номер в каталоге

Компоненты Описание

производитель

AT88SC0204C-MP

CryptoMemory® 2 Kbit

Atmel Corporation 

Description

The AT88SC0204C member of the CryptoMemory family is a high-performance secure

memory providing 2 Kbits of user memory with advanced security and cryptographic

features built in. The user memory is divided into four 64-byte zones, each of which may

be individually set with different security access rights or combined together to provide

space for 1 to 4 data files.

Smart Card Applications

The AT88SC0204C provides high security, low cost, and ease of implementation with-

out the need for a microprocessor operating system. The embedded cryptographic

engine provides for dynamic, symmetric-mutual authentication between the device and

host, as well as performing stream encryption for all data and passwords exchanged

between the device and host. Up to four unique key sets may be used for these opera-

tions. The AT88SC0204C offers the ability to communicate with virtually any smart card

reader using the asynchronous T = 0 protocol (Gemplus Patent) defined in ISO 7816-3.

Embedded Applications

Through dynamic, symmetric-mutual authentication, data encryption, and the use of

encrypted checksums, the AT88SC0204C provides a secure place for storage of sensi-

tive information within a system. With its tamper detection circuits, this information

remains safe even under attack. A 2-wire serial interface running at 1.5 MHz is used for

fast and efficient communications with up to 15 devices that may be individually

addressed. The AT88SC0204C is available in industry standard 8-lead packages with

the same familiar pinout as 2-wire serial EEPROMs.

Figure 1. Block Diagram

VCC

GND

Power

Management

Authentication,

Encryption and

Certification Unit

Random

Generator

SCL/CLK

SDA/IO

Synchronous

Interface

Asynchronous

ISO Interface

Data Transfer

Password

Verification

EEPROM

RST

Reset Block

Answer to Reset

Pin Descriptions

Supply Voltage (VCC)

Clock (SCL/CLK)

Serial Data (SDA/IO)

The VCC input is a 2.7V to 5.5V positive voltage supplied by the host.

In the asynchronous T = 0 protocol, the SCL/CLK input is used to provide the device

with a carrier frequency f. The nominal length of one bit emitted on I/O is defined as an

“elementary time unit” (ETU) and is equal to 372/f.

When the synchronous protocol is used, the SCL/CLK input is used to positive edge

clock data into the device and negative edge clock data out of the device.

The SDA pin is bidirectional for serial data transfer. This pin is open-drain driven and

may be wired with any number of other open drain or open collector devices. An exter-

2 AT88SC0204C

2022ES–SMEM–07/04

Share Link: