A3195ELT Просмотр технического описания (PDF) - Allegro MicroSystems

Номер в каталоге

Компоненты Описание

производитель

A3195ELT

PROTECTED, HIGH-TEMPERATURE, HALL-EFFECT LATCH WITH ACTIVE PULL-DOWN

Allegro MicroSystems 

3195

PROTECTED, HIGH-TEMP.,

ACTIVE PULL-DOWN

HALL-EFFECT LATCH

A3195EU AND A3195LU

Dimensions in Inches

(controlling dimensions)

Dimensions in Millimeters

(for reference only)

0.183

4.65

0.178

4.52

0.063

1.60

0.059

1.50

0.181

0.176

0.086 1

2

3

MAX

0.600

0.560

SEE NOTE

0.016

45°

0.018

0.015

4.60

4.47

2.18 1

MAX

15.24

14.23

SEE NOTE

2

3

0.41

0.050

0.100

Dwg. MH-003D in

1.27

2.54

45°

0.46

0.38

Dwg. MH-003D mm

NOTES: 1. Tolerances on package height and width represent allowable mold offsets.

Dimensions given are measured at the widest point (parting line).

2. Exact body and lead configuration at vendor’s option within limits shown.

3. Height does not include mold gate flash.

4. Recommended minimum PWB hole diameter to clear transition area is 0.035” (0.89 mm).

5. Where no tolerance is specified, dimension is nominal.

Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from

the detail specifications as may be required to permit improvements in the design of its products.

The information included herein is believed to be accurate and reliable. However, Allegro

MicroSystems, Inc. assumes no responsibility for its use; nor for any infringements of patents or

other rights of third parties which may result from its use.

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000

Share Link: