74LVC821APW Просмотр технического описания (PDF) - Philips Electronics
Номер в каталоге
Компоненты Описание
производитель
74LVC821APW
Philips Electronics
74LVC821APW Datasheet PDF : 12 Pages
| |||
Philips Semiconductors
10-bit D-type flip-flop with 5-volt tolerant
inputs/outputs; positive-edge trigger (3-State)
Product specification
74LVC821A
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
VCC
VI
VO
Tamb
tr, tf
DC supply voltage (for max. speed performance)
DC supply voltage (for low-voltage applications)
DC Input voltage range
DC output voltage range; output HIGH or LOW
state
DC output voltage range; output 3-State
Operating ambient temperature range in free-air
Input rise and fall times
CONDITIONS
VCC = 1.2 to 2.7V
VCC = 2.7 to 3.6V
LIMITS
MIN
MAX
2.7
3.6
1.2
3.6
0
5.5
0
VCC
0
5.5
–40
+85
0
20
0
10
UNIT
V
V
V
°C
ns/V
ABSOLUTE MAXIMUM RATINGS1
In accordance with the Absolute Maximum Rating System (IEC 134)
Voltages are referenced to GND (ground = 0V)
SYMBOL
PARAMETER
CONDITIONS
RATING
UNIT
VCC
DC supply voltage
IIK
DC input diode current
VI t0
VI
DC input voltage
Note 2
IOK
DC output diode current
VO uVCC or VO t 0
DC output voltage; output HIGH or LOW state Note 2
VO
DC output voltage; output 3-State
Note 2
–0.5 to +6.5
V
–50
mA
–0.5 to +6.5
V
"50
mA
–0.5 to VCC +0.5
V
–0.5 to 6.5
IO
DC output source or sink current
VO = 0 to VCC
"50
mA
IGND, ICC DC VCC or GND current
"100
mA
Tstg
Storage temperature range
–65 to +150
°C
Power dissipation per package
PTOT – plastic mini-pack (SO)
above +70°C derate linearly with 8 mW/K
500
– plastic shrink mini-pack (SSOP and TSSOP) above +60°C derate linearly with 5.5 mW/K
500
mW
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
1998 Sep 25
5
Share Link: