MCP23008 Просмотр технического описания (PDF) - Unspecified

Номер в каталоге

Компоненты Описание

производитель

MCP23008

8-Bit I/O Expander with Serial Interface

Unspecified 

MCP23008/MCP23S08

1.6.4

DEFAULT COMPARE (DEFVAL)

REGISTER FOR INTERRUPT-ON-

CHANGE

The default comparison value is configured in the

DEFVAL register. If enabled (via GPINTEN and

INTCON) to compare against the DEFVAL register, an

opposite value on the associated pin will cause an

interrupt to occur.

REGISTER 1-4:

DEFVAL – DEFAULT VALUE REGISTER (ADDR 0x03)

R/W-0 R/W-0 R/W-0 R/W-0

R/W-0

R/W-0

DEF7

DEF6

DEF5

DEF4

DEF3

DEF2

bit 7

R/W-0

DEF1

R/W-0

DEF0

bit 0

bit 7-0

DEF7:DEF0: These bits set the compare value for pins configured for interrupt-on-change from

defaults <7:0>. Refer to INTCON.

If the associated pin level is the opposite from the register bit, an interrupt occurs.

Refer to INTCON and GPINTEN.

Legend:

R = Readable bit

- n = Value at POR

W = Writable bit

‘1’ = Bit is set

U = Unimplemented bit, read as ‘0’

‘0’ = Bit is cleared x = Bit is unknown

© 2005 Microchip Technology Inc.

DS21919B-page 11

Share Link: